MAGNETIC INDOOR CYCLING BIKE SF-B904 The specifications of this product may vary from this photo and are subject to change without notice. For Customer Service, please contact: support@sunnyhealthfitness.
Important Safety Information We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. Please read the information below carefully before using this equipment. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained and used properly. 1.
EXPLODED DIAGRAM 2
PARTS LIST Part No. Description Qty Part No.
ASSEMBLY INSTRUCTIONS Step one: Install the Front bottom tube (3) and Rear bottom tube (2) to the Main frame (1) with the Bolts (13) and Flat washers (14). Note: The Foot adjustable knobs(12)under the bottom tubes can be adjusted to keep the equipment stable. Step two: Attach the Pedals (7L/R) to the Cranks (31L/R) respectively, viewed from the rider’s seated position. Note: Both pedals are labeled L FOR LEFT and R FOR RIGHT.
Step four: Attach the Handlebar (21) to the Handlebar post (6), secured with Bolts (24), Flat washers (26) and Spring washers (25). Then, Set the lower Handlebar cover (23) on the square tube of the Handlebar post (6) in alignment with the four grooves on the mouth of the lower Handlebar cover (23). When the lower Handlebar cover (23) slides to the top of the square tube of the Handlebar post (6); rotate the cover 45 degrees to align with the Handlebar (21).