User Manual

ASSEMBLY INSTRUCTIONS

Step one:

Install the Front bottom tube (3) and Rear bottom

tube (2) to the Main frame (1) with the Bolts (13) and

Flat washers (14).

Note: The Foot adjustable knobs（12）under the

bottom tubes can be adjusted to keep the equipment

stable.

Step two:

Attach the Pedals (7L/R) to the Cranks (31L/R)

respectively, viewed from the rider’s seated position.

Note: Both pedals are labeled L FOR LEFT and R FOR

RIGHT.

Important:

To tighten turn the left pedal COUNTERCLOCKWISE

and the right pedal CLOCKWISE.

Step three:

Fix the Saddle (8) onto the Saddle horizontal tube (5), and tighten

with the multi-functional wrench. Attach the well installed Saddle

horizontal tube (5) to the Saddle vertical tube (4), secure with the

Flat washer (29) and small L-shaped knob (30). Insert the Saddle

vertical tube (4) to the main frame section, secure with the

L-shaped knob (9) at a suitable height.