Instruction Manual

6
Step 3
Attach the seat (30) to the seat post (28) with the nylon nuts (34) and flat washers (33). Then
cover the seat post (28) with the plastic tube (31). At last, lock the seat post (28) on the main
frame (1) with knob (26).
Step 4
Attach the pedals (9L/R) to the crank (10). Each pedal is marked with L&R (for left & right)
respectively, viewed from the rider’s seated position.
★Important Note: The left pedal has reversed threading; you must turn
COUNTER-CLOCKWISE to tighten. Failure to adhere to this procedure may result in
permanent damage to your bike.