Instruction Manual

7
Step 5
Pull the pulse wire (21) through the handlebar post (11) and pull it out through the top hole of
the post. Then fix the handlebar (19) on the handlebar post (11) with screws (23), arc washers
(22), and flat washers (36). Lastly, attach the handle chuck cover (24).
Step 6
Pull the extension wire (13) and pulse wire (21) through the computer seat (35); then cover
the computer seat (35) on the handlebar post (11). Fix the computer (32) on the computer seat
(35) once the computer wires are all connected well.
Installation completed.
After finishing installation, please inspect all the screws and nuts carefully to make sure they
are securely tightened. Ensure that all the Nuts, Nut Caps and Pedals are in safe condition.
Inspect the equipment periodically. If you should find any defective parts, replace them
immediately. Don’t exercise until they have been repaired.