Instructions / Assembly

4
STEP 1:
Pull the Plastic Knob (No. 41) and open the support tube.
STEP 2:
Remove the preassembled
Cap Nuts (No. 39), Washers (No. 40)
and Bolts
(No. 38) off of Front Tube (No. 36). Install Front Tube
(No. 36) onto Main Frame (No. 44). Insert Bolts (No. 38) through
hole in Main Frame (No. 44) and place the Washers (No. 40)
onto Bolts (No. 38). Then, screw on the Cap Nuts (No. 39)
and tighten with Spanner (A).
STEP 3:
Bolts (No. 24) and Nuts (No. 12)
off of Main Frame (No.
Remove the preassembled
44). Install Handle (No.22 & 23)
onto Main
Frame (No. 44). Insert Bolts (No. 24) through
holes
and screw
on the Nuts
(No. 12) and tighten the
nuts with
Spanner (A).
#39
#38
M8 2pcs
M8 2pcs
#24 M8 4pcs
#12 M8 4pcs
# 40 2pcs
# A
36
12
23
22
24
44
39
39
40
40
44
38
# A
ASSEMBLY INSTRUCTIONS