Instructions / Assembly

5
STEP 4:
Remove the preassembled Bolts (No. 11) and Nuts (No. 12)
off of Support Tube
(No. 10). Install Support Tube (No. 10)
onto Main Frame
(
No
.
44
).
Insert Bolts (No. 11) through holes
and screw on the Nuts
(
No.12
) and tighten the nuts with
Spanner (A).
STEP 5:
Assemble the 2 Connecting Tubes (No. 9) and 4 Sponges
(No. 2).
STEP 6:
Remove the Pin (No. 4) from the hardware package and
assemble Hook Bar (No. 1) into the Hook Tube (No. 6).
Insert the Pin (No. 4) into the Hook Tube (No. 6).
Assemble
the Sponges (No. 2) onto the Hook Bar (No. 1).
11
#11 M8 2pcs
#12 M8 2pcs
10
12
44
9
9
2
1
4
6
2
2
2
2
2
# A