Instructions / Assembly

ADJUSTING THE BALANCE

Before using the product, check

the balance of the product to ensure that it is safe for use. Put the product

on a flat, even surface. If you find that the product is slightly uneven, you may adjust the product to

compensate

for uneven ground. To do so, rotate the end caps on the

stabilizers until they're even with the

surface. Please refer to the drawing below.

ADJUSTING THE BENCH ANGLE

Turn knob to loosen. Pull knob to release, set

bench at the desired angle. Reinsert the knob and turn to tighten.

Keep hands clear of moving parts to avoid injury.

Please adjust the end caps if

there is a slight imbalance

problem caused by uneven ground.

ADJUSTMENT GUIDE