Use and Care Manual

8
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [e-mail] or 1-877-90SUNNY
(877-907-8669).
17
1a
13
3
10
11
12
2
7
1a
1b
13
1
1b
7
7
13
25
3
17
#10 d8*Φ20*2*R16 2PCS
#12 M8*20 2PCS
#2 M5*10 4PCS
#11 d8 2PCS
#102 S5 1PC
#104 S13-14-15 1PC
STEP 3:
Remove 2 Bolts (No. 12), 2 Arc Washers (No. 10),
and 2 Spring Washers (No. 11) from Handlebar Post
(No. 17) using Allen Wrench (No. 102).
Insert the Handle Pulse Wires (No. 7) into the right
hole of the Handlebar Post (No. 17) and pull up the
Handle Pulse Wires (No. 7) from the top hole of
Handlebar Post (No. 17). Then, place Grommet (No.
25) into the hole of the Handlebar Post (No. 17).
Attach Middle Handlebar (No. 3) to Handlebar Post
(No. 17) using 2 Bolts (No. 12), 2 Spring Washers
(No. 11), and 2 Arc Washers (No. 10) that were
removed. Tighten and secure with Allen Wrench (No.
102).
Connect Computer Wires (No. 1b) with Handle Pulse
Wires (No. 7) and connect the Computer Wire (No.
1a) with Trunk Wire (No. 13).
Remove 4 Bolts (No. 2) from Computer (No. 1).
Attach Computer (No. 1) to Handlebar Post (No. 17)
using 4 Bolts (No. 2) that were removed. Tighten and
secure with Spanner (No. 104).