Use and Care Manual

12
MOVING THE BIKE
Lift the bike by the Lifting Handle (No. 27) until the
Wheels (No. 8) on the Front Stabilizer (No. 2)
touch the floor. Now you can move the bike.
OPERATING INSTRUCTIONS
The Powersync Self-Powered Recumbent Bike can generate its own power. When you pedal the
bike, it generates power to power the meter and charge a device.
The first time you use the bike or if you have not used the bike in a while, you have to pedal for
about 5 minutes before there is enough power for the meter to display. When you stop pedaling, the
meter will shut off.