Instruction Manual

5
ASSEMBLY INSTRUCTIONS
STEP 1:
Attach the front stabilizer (8) to the front main frame (1), and the rear stabilizer (6) to the rear
main frame (2), respectively with carriage bolts (9), flat washers (10), and acorn nuts (11).
STEP 2:
A: Connect the pulse wires a (33) with pulse wires b (35) together.
B: Loosen the knob (27) and pull it upward; then insert the rear main frame (2) to the front main
frame (1). (Make sure you keep the pulse wires a (33) and pulse wires b (35) inside the tube of
the main frame while installing this step.). Align the hole on the rear main frame (2) to the hole
on the front main frame (1). Then release the pin of the knob (27) into the aligned holes and
fasten tightly.
Tips: If you need to adjust the rear main frame (2) forward or backward, please follow the
above step to select desired position. Before using the machine, please find the most
suitable position according to your height in order to ensure a steady frame.