TWIST-IN STEPPER SF-S0636 USER MANUAL IMPORTANT! Read all instructions carefully before using this product. Retain owner’s manual for future reference. For customer service, please contact: support@sunnyhealthfitness.
IMPORTANT SAFETY NOTICE Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precautions: 1. The Twist-In stepper is not a toy. Keep children and pets away from the machine at all times. Do not leave children unattended in the same room with the machine. 2. Only one person at a time should use the machine. 3. If the user experiences dizziness, nausea, chest pain, or any other abnormal symptoms, stop the workout at once.
Check regularly all screw-connections and moving parts. Damaged parts have to be changed immediately. Do not use the product until it has been repaired. Clean your equipment with non-caustic detergents. Use a soft cloth for drying after cleaning. A) This product has been tested in accordance with the requirements of EN 957-1, 957-8 standard, class H (home use). The maximum load is limited to 100 kg.
ASSEMBLY INSTRUCTIONS Put the 2 Plastic End Pieces (13) onto the rear tube. Make sure the ball pins pop into the holes on the bottom of the rear support. See drawing below.
BATTERY INSTALLMENT (REPLACEMENT): If the meter display is not clear, try replacing the battery. The stepper uses 1 x 1.5V AAA battery. To replace the battery, use the notch that is next to the button and gently pull the meter up slightly to loosen. Carefully pull the meter out all the way. Change the battery. Put the meter back into the stepper. Dispose of old battery according to your state and local guidelines. METER FUNCTIONS: Press the button to select a function.
Parts List NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 DESCRIPTION Main frame Pedal holder, right Pedal holder, left Hydraulic cylinder Pedal, right Pedal, left Front base support Plastic spacer Meter Magnet Axle, diam. 16x170 mm Square plastic bushing, diam. 25.4 mm Plastic end piece Plastic bushing, diam.