ELECTRIC TREADMILL SF-T7860 USER MANUAL IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED US: support@sunnyhealthfitness.com or 1- 877 - 90SUNNY (877-907-8669).
IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained, and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions. 1.
EXPLODED DIAGRAM ASSEMBLY CONTENTS When you open the carton, and you will find the below parts in the carton.
PARTS LIST No. Description Spec. Qty. No. Description Spec. Qty.
HARDWARE PACKAGE Ordering Replacement Parts (U.S. and Canadian Customers only) Please provide the following information in order for us to accurately identify the part(s) needed: ✓ The model number (found on cover of manual) ✓ The product name (found on cover of manual) ✓ The part number found on the “EXPLODED DIAGRAM” and “PARTS LIST” (found near the front of the manual) Please contact us at support@sunnyhealthfitness.
ASSEMBLY INSTRUCTIONS STEP 1: Open the carton and remove all contents. Place the Main Frame (No. 1) on level ground and ensure that you have a clean, adequate work space. Do not cut the Packing Belt (No. B) until the assembly is complete! STEP 2: Attach Computer Bracket (No. 5) onto the Upright Frames (No. 3) using 2 Bolts (No. 51) and 2 Lock Washers (No. 64). Tighten and secure with Allen wrench (No. 12). STEP 3: Pull up the Computer Bracket (No. 5) and Upright Frames (No. 3) as the arrow indicates.
STEP 4: Attach Upright Frames (No. 3) onto Base Frame (No. 2) with 2 Bolts (No. 53), 2 Bolts (No. 51) and 4 Lock Washers (No. 64). Tighten and secure with Allen Wrench (No. 12). Notice: Support the Upright Frames (No. 3) with both hands to avoid falling down and causing injury. STEP 5: Insert the Safety Key (No. 71) into the computer. The assembly is now complete. Now you can cut the Packing Belt (No. B).
FOLDING INSTRUCTIONS To fold the treadmill, place your hands at position A and lift the running board all the way up until you hear the safety lock ‘Click’ from the safety cylinder. Pulling down: To unfold the treadmill, simply give the safety cylinder a light kick at position B and pull down the running board at position A at the same time. With its soft drop system, the machine will unfold slowly. (Please keep everyone and all pets away the machine when unfolding the treadmill).
HOW TO MOVE THE TREADMILL Before attempting to move the treadmill, make sure that it has been properly folded. Unplug the power cord. To tilt, start by placing one hand at position “P” to support the top end of the treadmill. Next, place one foot at position “K” to hold the bottom end of the treadmill steady. With your foot at “K”, slowly tilt the top of the treadmill downward towards the ground. Once the Main Frame “P” reaches a low enough point, the wheels of the treadmill will touch the ground.
HOW TO ADJUST THE INCLINE The treadmill slope is manual mode, the highest gradient is a 3-degree high slope mode, the second gradient is a 1-degree high slope mode, and the lowest gradient is flat land mode. You could adjust the slope by inserting 2 Fix Pins (No. 23) into the holes on 2 Adjustable Foot Pads (No. 16). When 2 Fix Pins (No. 23) are inserted into the lowest holes of the 2 Adjustable Foot Pads (No. 16) (Fig. A), the slope of the treadmill is at the highest gradient. Fig.
IMPORTANT ELECTRICAL INFORMATION IMPORTANT NOTE: This treadmill requires a power source of 110 Volts to properly operate. For your safety, as well as the safety of others, please verify that the power source is correct before powering the equipment. Any power supply source above or below this level could cause significant damage to the equipment and/or user. GROUNDING METHODS: This product must be grounded.
CONSOLE GUIDE WINDOW DISPLAY 1. SPEED: The speed range is 0.5-7.5 MPH. The initial default speed is 0.5 MPH. 2. CALORIES: Displays total calories burned. 3. TIME: Displays the elapsed running time. 4. DISTANCE: Display the total distance traveled. 5. PULSE: Displays your pulse data when hands are placed on the sensors. BUTTON FUNCTION “START” BUTTON: Insert the Safety Key (No. 71) into the console and press START to start the treadmill.
“MODE” BUTTON: When the treadmill is in the standby mode, press MODE to choose from the following: manual mode, time count down mode, distance count down mode, and calories count down mode. SPEED +/- KEYS: During use, press these +/- keys to increase or decrease your speed. The speed will adjust 0.1 MPH at a time. 1MPH, 2MPH,3MPH,4MPH,5MPH,6MPH (QUICK SPEED KEYS): During use, press these quick speed keys to instantly bring the running belt to the desired speed of 1MPH, 2MPH, 3MPH, 4MPH, 5MPH, and 6MPH.
RUNNING DATA DISPLAY AND SETTING RANGE INITIAL DATE 0:00 --0 P 0 0:00 PROGRAM TIME SPEED(M/H) DISTANCE(MILE) PULSE CALORIES(CAL) MODE TIME INITIAL SETTING DATE 30:00 --1.0 N/A 50.0 15:00 SET RANGE SHOW RANGE 5:00-99:00 --0.5-99.9 N/A 10.0-999 5:00-99:00 0:00-99:59 0.5-7.5 0.00-99.
1. DATA DISPLAY AND SET RANGE Parameter Type Default Setting Range Mark SEX (-1-) 1 (MALE) 1—2 1=MALE 2=FEMALE AGE (-2-) 25 10—99 HEIGHT (-3-) 68 in 40—78 in WEIGHT (-4-) 154 LBS 44—330 LBS 2.
EXERCISE INSTRUCTIONS GETTING STARTED Before starting any exercise programs, you should consult your physician to determine if you have any medical or physical conditions that could put your health and safety at risk or prevent you from using the treadmill properly. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health.
MAINTENANCE GUIDE General cleaning will help to prolong the life and improve the performance of your treadmill. Keep the unit clean and maintained by dusting the components on a regular basis, cleaning the two exposed sides of the running belt will prevent dust from accumulating underneath the belt. Keep your running shoes clean so that dirt from the shoes does not wear out the running belt. Clean the surface of the running belt using a clean damp cloth.
LUBRICATING THE TREADMILL Lubricating the running belt & running board is essential as the friction affects the life span and operations on the treadmill. Inspect the running belt regularly. If you find any wear on the running board, please contact us at support@sunnyhealthfitness.com. WARNING: Always unplug the treadmill from the electrical outlet before cleaning, lubricating, or repairing the unit.
TROUBLESHOOTING CODE Description How to troubleshoot E01 1. Message wire is broken or 1. Check if the computer and bottom not connected well. control board wire is connected well. 2. Check if IC on bottom control board is loose, reset the IC. 2. Computer or control board is 3. If you experience a problem with the broken. power on the bottom control board, change the bottom control board. E02 1. The wire for the motor is not connected well or the carbon brush inside the motor is loose. 2.
19