MAGNETIC TRAINING TREADMILL SF-T7878 USER MANUAL IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED US: support@sunnyhealthfitness.com or 1- 877 - 90SUNNY (877-907-8669).
IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained, and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions. 1.
EXPLODED DIAGRAM 14 8 13 13 18 16 17 17 18 12 45 2 19 27 28 10L 9 26 24 20 41 20 19 21 22 26 15 32 25 23 26 30 29 24 22 30 25 26 29 23 30 39 11 28 47 38 1 47 26 36 37 35 26 25 38 39 25 35 36 28 31 30 43 18 10R 32 39 47 44 18 40 32 34 47 5 37 3 4 42 39 11 34 33 33 6 7 2
PARTS LIST No. Qty. No. 1 2 Main Frame Handlebar 1 1 25 26 3 Incline Adjuster 1 27 4 Front Roller 1 28 5 Rear Roller 1 29 6 7 Running Board Running Belt 1 1 30 31 8 Meter 1 32 9 Cylinder 1 33 10R Right Plastic Cover 1 34 10L 11 12 13 14 15 16 17 M5*15 1 2 1 2 2 1 1 5 35 36 37 38 39 40 41 42 ST4.
UNFOLDING INSTRUCTIONS STEP 1: Remove Knob (No. 21) by rotating it counter-clockwise. Then, simply give the treadmill a light kick to the position on Cylinder (No. 9) that the arrow points to. Let Main Frame (No. 1) lower slowly on its own. 1 21 9 2 STEP 2: Once the Main Frame (No. 1) touches the ground, attach Knob (No. 21) into the hole on Handlebar (No. 2). Rotate the Knob (No. 21) clockwise to tighten. The unfolding is complete.
FOLDING INSTRUCTIONS STEP 1: Remove the Knob (No. 21) by rotating it counter-clockwise. Lift up Main Frame (No. 1). 2 21 STEP 2: Once the Cylinder (No. 9) is in place, align the holes on Main Frame (No. 1) and Handlebar (No. 2), then attach Knob (No. 21) into the holes. Rotate the Knob (No. 21) clockwise to tighten. The folding is complete.
HOW TO ADJUST THE INCLINE Pull out Incline Adjuster (No. 3), rotate the Incline Adjuster (No. 3), and push it into the desire incline. This completes the incline adjustment.
HOW TO MOVE THE TREADMILL Before attempting to move the treadmill, make sure that it has been properly folded. To tilt, start by placing one hand at Handlebar (No. 2) to support the treadmill. Next, place one foot on Transportation Wheels (No. 23) to hold the bottom end of the treadmill steady. With your foot at Transportation Wheels (No. 23), slowly tilt Handlebar (No. 2) downward towards the ground. Once Handlebar (No. 2) reaches a low enough point, the Transportation Wheels (No.
MAINTENANCE INSTRUCTIONS CENTERING THE RUNNING BELT: If the Running Belt (No. 7) is off-center, the unit will make noise. Please use the tool to readjust the Running Belt (No. 7) if it is too loose or too tight. 1. When the Running Belt (No. 7) moves to the right side, please turn the right side Bolt (No. 35) clockwise 1 or 2 circles, and then turn back slightly. 2. When the Running Belt (No. 7) moves to the left side, please turn the left side Bolt (No.
TREADMILL LUBRICATION IMPORTANT NOTE: You will need to lubricate your treadmill before the first use! RUNNING BELTS & TREADMILL LUBRICANT: Lubricating the Running Belt (No. 7) & Running Board (No. 6) is essential as the friction between the two affects the life span and operations of the treadmill. Inspect the Running Belt (No. 7) regularly. If you find any wear on the Running Board (No. 6), please contact us at support@sunnyhealthfitness.com. Lift one side of the Running Belt (No.
METER INSTRUCTIONS FUNCTION BUTTONS MODE: Press the Mode button to select the function displayed. Press and hold the Mode button for 3 seconds, all the function values except Odometer will be reset to zero. SET: To set up the target value of Time, Distance, and Calories. You can hold the button to increase the value fast. (No motion should be detected at the time of setting). RESET: Press the button to reset Time, Distance, and Calories.
6. TIME: Displays the workout time from 00:00 to 99:59. The user also can press the Mode button to display the workout time value. Press the Mode and Set button to preset Time. 7. CALORIES: Displays the calories burned during training from 0.0 to 9999. The user also can press the Mode button to display the calories burned. Press the Mode and Set button to preset Calories. 8. ODOMETER: Displays the total accumulated distance from 0.0 to 999.9.