User Manual

Remote Testing
Button for testing the device's function for 5 seconds.
Button for testing the device's function for 30 seconds.
Button for testing the device's function for 60 seconds.
Button for turning on auto battery test system
Button for turning off auto battery test system
Button for canceling the test
FRONT VIEW
BACK VIEW
SIDE VIEW
Initial Trouble Shooting
Problem Cause What to do
- Power not getting to the unit
after plugging in. The LED AC
light does not turn on.
- Emergency light does not turn
on after the power went out.
- Emergency light only turns on
for a short time after the power
went out.
- The power socket might not have any
power.
- The plug or socket is loose.
- The AC.230V fuse is blown.
- Check the 230VAC power supply.
- Check the plug and socket.
- Contact customer service.
- The battery is not fully charged.
- The battery is past its operational
lifetime or has deteriorated
- Take the emergency light unit to
charge until the “LED Charge”
indicator turns off.
- Contact customer service to
replace the battery
- The lamp is faulty
- The circuit's wiring is loose.
- The DC fuse is blown
- Contact customer service.
- Contact customer service.
- Contact customer service.
Dimension (mm)
Remote Testing