User Guide

We hope you will find these instructions helpful in setting up your product.
place the base upright in the desired area.
1) Place the large bowl on the
base,twist and lock the bowl to the
pedestal.
2) Feed the cable on the
pump down into the pipe in
the middle of the large
bowl.
3)Place the top on the middle
bowl.
4) The final product
Operating Instructions
For complete operating instructions, please see the included manual.
1. Install the included batteries.
2. Attach the included stake to the panel.
The pump must be fully submersed at all times to avoid pump burnout.
Product must be properly stored for winter.
5. Place the panel in a location where it will obtain consistent direct
sunlight.
6. Fill the fountain with clean water.
3) Connect the tubing from
the top to the outlet of the
pump.
SOLAR FOUNTAIN INSTALLATION INSTRUCTION
F921
3. Fully charge the unit with the included charging cable or a minimum
of 6 hours of direct sunlight.
4. Plug the cord of the pump to the corresponding socket on the panel.
The final assembly should
look like this.
3) Connect the tubing from
the top to the outlet of the pump.
Locate a flat, firm surface to place your fountain. Once you have found the perfect spot for your fountain,
7. Turn the device on by pressing the power button.
8. Toggle the device to the desired method of operation: Direct solar or
Battery Power.
Direct Solar Power is the default method of operation. Battery
Powered operation will work for a period of up to 4 hours with a full
charge.