Instructions / Assembly

02/2020PH004-3
STEP 4
Place Umbrella Canopy (S) onto Umbrella
Frame (L).
Slide the ribs into the plastic caps that are
sewn into the ends of the umbrella canopy.
NOTE:
The canopy is intended to t tightly. Some
force may be required but take care not to bend
the ribs of the umbrella frame.
STEP 5
Identify the tops of Seat Back Poles (E &
F); the top will have a plug in the end.
Ensuring the holes to secure the arms are
on the outsides of the poles.
With Closed S-Hook (N) in between Left
Seat Back Pole (E) and Right Seat Back
Pole (F), secure components with M8x95
Bolt Set (T), as shown.
STEP 6
Press the button spring clip on Right Seat
Pole (G) and slide it into Front Seat Frame
(I), the button will snap into place.
Press the button spring clip on Left Seat
Pole (H) and slide it into Front Seat Frame
(I), the button will snap into place.
Connect the assembled seat to the seat
back poles, as shown.
Attach Seat Frame Brace (J) to the
backside of the seat poles using 2x M8x15
Bolt (W).
Page 4 / 6