Owners manual

Connect the second big plate
and the second big pillar tightly
Feed the rubber hose throught the plastic tube of
smallest plate centre. then connect top part and
smallest plate tightly
Feed the rubber hose throught the plastic tube of
small plate centre then connect the smallest pillar
and small plate tightly
Feed the rubber hose throught the
plastic tube of second big plate then
connect the small pillar and the
second big plate tightly.
Feed the rubber hose throught
the small pillar then connect the
small plate and small pillar tightly
connect the big plastic host to pump outlet.Please close the small door to the
second big pillar, then fill the big plate with enough clean water to assure the pump
to work properly. Plug the pump, water will start to flow in a minutes.
These instructions will assist you in setting up your new fountain.
Feed the rubber hose throught the
smallest pillar then connect the
smallest plate and smallest pillar
tightly
Unpack carton carefully, arranging parts safely in your working area prior to assembly.
Connect the biggest plate and the
biggest pedestal tightly
Get the wire of pump through plastic pipe of bigget plate centre. Make sure the
wire put into the biggest pedestal's cavity.
Connect the second big pillar to the
biggest plate tightly