Instructions / Assembly

These instructions will assist you in setting up your new fountain.
Feed the rubber hose through the
smallest pillar then connect the
smallest plate and smallest pillar
tightly
Unpack carton carefully, arranging parts safely in your working area prior to assembly.
Connect the biggest plate and the
biggest pedestal tightly
Get the wire of pump through plastic pipe of biggest plate center. Make sure the wire
put into the biggest pedestal's cavity.
Connect the second big pillar to the
biggest plate tightly
Connect the second big plate
and the second big pillar tightly
Feed the rubber hose through the plastic tube of
smallest plate center. then connect top part and
smallest plate tightly
Feed the rubber hose through the plastic tube of
small plate center then connect the smallest pillar
and small plate tightly
Feed the rubber hose throught the
plastic tube of second big plate then
connect the small pillar and the
second big plate tightly.
Feed the rubber hose through the
small pillar then connect the
small plate and small pillar tightly
Connect the big plastic host to pump outlet. Please close the small door to the second
big pillar, then fill the big plate with enough clean water to assure the pump to work
properly. Plug the pump, water will start to flow in a minutes.
Thank you for choosing Sunnydaze Décor. If you have any questions, comments or
concerns please feel free to contact us by phone at: 888-881-4668, by email:
[e-mail], or you could also email us via our contact
us page at: www.SerenityHealth.com/contact-us/.
We stand behind our brand and the quality of the items we sell. We will send new
parts, or replace products at our discretion within the one year warranty period.
Before we can help, you will need to provide proof of purchase with the date of
purchase and photos of the defective merchandise. We will use the photos to
determine the cause of defect and for future quality control.