Outdoor Fountain General Use & Care Guide Information provided within this guide may not cover every condition and situation that may occur. Please practice sound judgment when using your fountain. Always refer to the original product manual for information specific to your fountain. When in doubt, we'll help you out. See contact information below.
Set-Up Location Adding an outdoor water fountain to your garden or landscape can bring it to life. Below are a few things to consider when adding a water feature. 1. Power Source: Consider proximity to the power source (electrical outlet, solar panel placement). 2. Vegetation: Be mindful of the trees and plants in the area as they might drop leaves or debris. Installation of fountains in areas with heavy vegetation will require the pump and fountain to be cleaned more often. 3.
Know Your Fountain Features Recirculating Water No plumbing is required for Sunnydaze outdoor fountains, water recirculates through the fountain via the included submersible pump. Only use water and fountain care products that are designed for use with the material(s) of your fountain. 1. Water: Distilled water will help prevent mineral buildup, as well as reduce bacteria and algae buildup. Tap water may be used but avoid heavily chlorinated water as the chlorine may damage the fountain and the pump. 2.
Maintenance Cleaning Outdoor fountains should be cleaned every 4-6 weeks to keep it in tip-top condition. Regular cleaning will help keep the water clear, keep the pump clean, and keep algae and white scale buildup at bay. D O NOT USE BLEACH D O NOT USE A PRESSURE WASHER 1. Fountain: Unplug the fountain, empty the water, and remove the pump. Wash the fountain with clean water, a soft sponge, and mild soap; equal parts water and distilled white vinegar also work well.
Troubleshooting Pump Not Working When operating the pump for the first time, it may take a few minutes before water begins to flow properly. If it is still not working after a few minutes or is loud, please follow these troubleshooting tips below. 1. Pump Submerged: Ensure your pump is fully submerged in water at all times to avoid pump damage. 2. Pump Receiving Power: Check to make sure the power source for your pump is hooked up and operational.
Water Flow Rate Most electric and solar with battery backup fountains have a pump with a dial or valve to adjust the flow rate, experiment with the flow rate until you are satisfied with how the water flows. If your fountain does not have the flow control option or you are still unsatisfied with the flow rate, check out the troubleshooting tips below. 1. Adjust the Water Level: Insufficient and excessive water levels can affect water intake by the pump.
