Instructions / Assembly
BILLOWING SLATE TABLETOP WATER FOUNTAIN WITH LIGHT
GSI-420
Read assembly instructions carefully and follow the care instructions. Save these instructions for future reference.
Select a smooth, level surface to place the fountain.
TROUBLESHOOTING
• Ensure that the pump is fully submerged, add water if necessary.
• Check to make sure the power outlet is working; if in doubt about electrical connections, consult a certified electrician.
• Check the pump and tubing for obstructions.
• Check the flow control on the body of the pump as it may need to be adjusted to achieve the desired flow rate.
• If the light is not working, ensure the cables are fully connected and the seal is adequately tightened (do not over-tighten).
• If water is not flowing within several moments of the fountain being plugged in, unplug the power supply for a few moments and plug it back
in; the pump may have air trapped inside it which can prevent water from circulating properly.
USE & CARE
• FOR INDOOR USE ONLY.
• Keep fountain out of reach of children and pets.
• Keep power cord away from all heat sources. Do not place electrical cords in areas with high temperatures.
• Check the water level frequently to ensure the pump remains fully submerged; never allow the pump to run dry as it will burn out the motor.
• Only use water in this fountain; distilled water is recommended to prevent mineral buildup.
• Periodically change the water to reduce scale and buildup — clean components regularly for optimal performance and appearance.
DO NOT use harmful additives such as bleach, chlorine, etc.
DO NOT use abrasive materials to scrub the fountain.
• Always shut off the power supply before cleaning and maintaining the fountain and the recirculating pump.
• Take care when handling the pump; only pick it up by the body of the pump, never by the power cord.
IMPORTANT INFORMATION
SPQ9069 Page 1 / 112/2019
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we
sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof
of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
Photos are used to determine the cause of defects and for future quality control. Register your warranty at
www.serenityhealth.com/warranty/
If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:
customerservice@sere nityhealth.com, or via our contact us page at www.SerenityHealth.com/contact-us/
Purchase Date: / / Order/Customer Reference Number:
Note: When rst used, there may be air trapped in the pump. It may take several minutes for the air to escape and water begins to ow.
CONNECT
CONNECT
D
A
B
C
F
E
Ensure all parts are
accounted for before
disposing of packaging.
ASSEMBLY
1. Attach Electric Submersible Pump (C) to Fountain Body (A).
2. Connect Finger Light (B) to the short cord on Electric
Submersible Pump (C), then attach Finger Light (B) to the
underside of Fountain Body (A).
3. Gently place the fountain body onto Basin (D), ensuring the
pump power cord runs out the backside of the fountain.
4. Connect Adapter (E) to the pump power cord.
5. Fill the fountain with enough water to keep the pump fully
submerged during operation.
6. Gently place Decorative Stones (F) onto the fountain body.
7. Plug the power cord into a properly grounded GFCI outlet.
NOTE: The water tubing is built into the fountain body. Take care when handling
the water tube; detaching the water tube from the fountain will damage the fountain
and void the product warranty.
A Fountain Body 1
B Finger Light 1
C Electric Submersible Pump 1
D Basin 1
E Adapter 1
F Decorative Stone 1 PK