Instructions / Assembly

ManualsBrandsSunnydaze Decor ManualsOther48 in. Slate Staircase Cascade Fountain with Copper Accents and LED Spotlight

SPQ1141 Page 1 / 2

DESCENDING STAIRCASE SLATE OUTDOOR WATER

FOUNTAIN WITH COPPER ACCENTS AND LED SPOTLIGHT

GSI-828

Read the assembly instructions carefully and follow the care instructions. Save these instructions for future reference.

Select a smooth, level surface to place the fountain.



Note: When rst used, there may be air in the pump. It may take several minutes for trapped air to escape, allowing water to ow.

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we

sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof

of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.

Photos are used to determine the cause of defects and for future quality control. Register your warranty at

www.serenityhealth.com/warranty/

If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:

customerservice@sere nityhealth.com, or via our contact us page at www.SerenityHealth.com/contact-us/

Purchase Date: / / Order/Customer Reference Number:

NOTE: The water tubing is built into the

upper fountain body. Take care when handling

the water tube; detaching the water tube from

the fountain will damage the fountain and void

the product warranty.

The copper components may patina; this is

a natural characteristic of copper and is not

cause for return or replacement.

  

A Basin 1

B Spotlight with AC Adapter 1

C Electric Submersible Pump 1

D Lower Fountain Body 1

E Upper Fountain Body 1

F Washer 2

G Bolt 2

H Decorative Stones 1 PK

I Back Bolts 1

J Splash Guard 1

Inspect packaging to ensure all

parts are accounted for before

disposing of packing materials.

CONNECTORS

01/2020

ASSEMBLY

1. Place the light in the basin and connect the AC adapter.

2. Gently place the upper fountain body onto the lower fountain body and secure them using the back bolts.

Secure the water tube from the upper fountain body to the clip on the back of the lower fountain body.

3. Connect the pump to the water tube. Gently place the assembled components onto the basin and secure

the fountain body to the basin with the washers and bolts. NOTE: the pump has an adjustable ow rate;

adjust the dial to achieve the desired ow rate.

4. Place the splash guard on the lower fountain body and gently lay the decorative stones in the basin.

5. Fill the fountain with enough water to keep the pump fully submerged during operation; approximately 3 gallons.

6. Plug the power cords into properly grounded GFCI outlets.

Summary of content (2 pages)

PAGE 1
Purchase Date: / / Order/Customer Reference Number: Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine the cause of defects and for future quality control. Register your warranty at www.serenityhealth.
PAGE 2
IMPORTANT INFORMATION USE & CARE • For outdoor use only. • The lighting feature of this fountain is optional. To turn the light off, simply unplug the 2-prong power cord. • Check the water level frequently to ensure the pump remains fully submerged; never allow the pump to run dry as it will burn out the motor. • Only use water in this fountain. Distilled water will help prevent mineral buildup but is not required, avoid heavily chlorinated tap water as it may damage the fountain or pump.