Instructions / Assembly

ManualsBrandsSunnydaze Decor ManualsFountains & PumpsRippled Slate Indoor Fountain with Copper & Spotlight - 48 Inch Tall

SPQ1375 Page 1 / 2

RIPPLED SLATE WATER FOUNTAIN

WITH COPPER ACCENTS AND LED SPOTLIGHT

GSI-835

Read the assembly instructions carefully and follow the care instructions. Save these instructions for future reference.

Select a smooth, level surface to place the fountain.



Note: When rst used, there may be air in the pump. It may take several minutes for trapped air to escape, allowing water to ow.

03/2020

NOTE: The water tubing is built into the fountain

body. Take care when handling the water tube;

detaching the water tube from the fountain will

damage the fountain and void the product warranty.

Slate is a natural product; the colors and texture of

each piece are unique, and no two fountains will look

the same. The copper components may patina; this

is a natural characteristic of copper. These natural

characteristics of this fountain are not cause for

return or replacement.

  

A Fountain Body 1

B Electric Submersible Pump 1

C Spotlight with AC Adapter 1

D Basin 1

E Front Plate 1

F Washer 2

G Bolt 2

H Decorative Stones 1 PK

CONNECT

B C

Light

Pump

Drainage Hole

ASSEMBLY

1. Connect the pump to the fountain body.

2. Gently lay the front plate on the front of the basin. Place the spotlight on the front plate and run the cord out

the back of the basin. Firmly connect the AC adapter to the light cable.

3. Gently place the fountain body onto the back side of the basin, ensuring the pump power cord runs out the

groove in the back of the basin. Secure the fountain body to the basin with the washers and bolts.

4. Gently place the decorative stones inside the basin, on the front plate and fountain body.

5. Fill the fountain with enough water to keep the pump fully submerged during operation; approximately 3 gallons.

6. Plug the power cords into properly grounded GFCI outlets.

Inspect packaging to ensure all

parts are accounted for before

disposing of packing materials.

Purchase Date: / / Order/Customer Reference Number:

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.

Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with

the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine

the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty

If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:

customerser vice@nethealt hshops.com, or via our contact us page at https://tiny.cc/SunnydazeContact

Summary of content (2 pages)

PAGE 1
Purchase Date: / / Order/Customer Reference Number: Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine the cause of defects and for future quality control. Register your warranty at https://tiny.
PAGE 2
IMPORTANT INFORMATION USE & CARE • For outdoor use only. • The lighting feature of this fountain is optional. To turn the light off, simply unplug the 2-prong power cord. • Check the water level frequently to ensure the pump remains fully submerged; never allow the pump to run dry as it will burn out the motor. • Only use water in this fountain. Distilled water will help prevent mineral buildup but is not required, avoid heavily chlorinated tap water as it may damage the fountain or pump.