Installation Guide

ManualsBrandsSunnydaze Decor ManualsGarden CenterSunnydaze 4 ft. x 2 ft. x 3 ft. - Steel and PVC - Clear - Raised Garden Bed and Greenhouse Kit

RECTANGULAR GALVANIZED STEEL

RAISED GARDEN BED

WITH GREENHOUSE KIT

Review assembly drawings carefully and follow the care instructions. Save this document for future reference.

Assemble components on a soft, clean surface to avoid scratching or damaging any surfaces.

Page 1 / 5

Inspect packaging to ensure all

parts are accounted for before

disposing of packing materials.

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.

Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with

the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine

the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty

If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:

customerservice@sunnydazedecor.com, or via our contact us page at https://tiny.cc/SunnydazeContact

Purchase Date: / / Order/Customer Reference Number:

CHOKING HAZARD — This item contains small

parts that can be swallowed. Keep children away

during assembly.

WARNING

G2055 / G2096

CAUTION: Sharp edges; gloves are recommended for

garden bed assembly.

  

A Long Panel 2



Short Panel 2

C Corner 4

D Bolt 32

E Wing Nut 32

  

1 Vertical Tube 4

2 Horizontal Tube 7

3 Roof Tube 4

Horizontal Tube w/

Torsion Spring

5 Cover 1

  

3-Way Elbow

Fitting

3-Way Angled

Elbow Fitting

09/2021

Summary of content (5 pages)

PAGE 1
Purchase Date: / / Order/Customer Reference Number: Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine the cause of defects and for future quality control. Register your warranty at https://tiny.
PAGE 2
GARDEN BED ASSEMBLY HELPFUL HINT Do not tighten any hardware until the entire unit is loosely assembled. If hardware is tightened too soon, mounting holes may not align and parts may not easily fit together. 1. Align Corner (C) on the inside edges of Long Panel (A) and Short Panel (B). 2. Insert Bolt (D) through the outside edges of the panels and through the corner panel. Loosely secure the bolts by hand-tightening Wing Nuts (E). 3. After all pieces have been loosely assembled, tighten all wing nuts.
PAGE 3
GREENHOUSE FRAME ASSEMBLY HELPFUL HINTS Identify and separate all frame tubes and connectors, so they are easy to identify during assembly. Ensure all tubes get fully inserted into the connectors. A tighter and smaller frame enables the greenhouse cover to slide on easily.
PAGE 4
STEP 5 1: 4 General Use & Care We cannot foresee every possible scenario or climate in which this greenhouse could be used. Information provided is a basic guide and may not be suited for your particular needs. Use sound judgment when using your new greenhouse. CHOOSING A LOCATION Place your greenhouse on raised, level ground to ensure good drainage. Select a location that will receive maximum sun exposure.
PAGE 5
MAINTENANCE AND STORAGE Hose down your greenhouse using a low-pressure garden hose with a sprayer. Mild dish soap and a soft cloth may be used to help remove stubborn dirt and pollen build-up. Do not use harsh chemical cleaners. In climates where snow and ice accumulate, disassemble and store in a cool, dry location. Ensure that the greenhouse is clean and COMPLETELY DRY before storing. Mold and mildew can grow if it is stored wet or even slightly damp.