Instructions / Assembly

STEEL LAWN EDGING

Read this manual carefully before use and save it for future reference.

Page 1 / 2 060039 11/2020

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.

Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with

the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine

the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty

If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:

customerservice@sunnydazedecor.com, or via our contact us page at https://tiny.cc/SunnydazeContact

Purchase Date: / / Order/Customer Reference Number:

PREPARE AREA

HELPFUL TIPS

• Before beginning, ensure you have enough edging to complete your project. Remember, the overall length

will be shorter when edging is overlapped during installation.

• If shaping edging for or around corners, wait to bend the edging until the corner section is being installed.

• Only use a wooden block or table edge when bending edging; the corners should always be slightly rounded.

• Overlap or bend surplus edging to finish installation; cutting is not advised as it will void the product warranty

and require the exposed end be painted to prevent rust.

(not included)

Lawn Edger

String & Spikes

(not included)

Screwdriver

Mallet

Wooden Block

Gloves

Mark out the area using use string & spikes.

Following the marked area, use a lawn edger to cut a

nice, clean face around the inside perimeter of the string

and spikes.

Remove excess turf, but keep some in case you need to

backll later.

Clear any debris, such as rocks and stones, that may

prevent the edging from installing smoothly.

PAGE 1
Purchase Date: / / Order/Customer Reference Number: Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine the cause of defects and for future quality control. Register your warranty at https://tiny.
PAGE 2
INSTALLATION Read and fully understand installation instructions before beginning. Lay edging strips along the prepared edge so they are easily accessible when you need them. Ensuring the rounded sides of the spikes face forward and the flat edge is against the turf, drive one end of the edging to the correct depth, leaving the other end sufficiently clear to link the next section. • Install edging with the flat side against the turf, as shown.