Instructions / Assembly

ManualsBrandsSunnydaze Decor ManualsFountainsButterfly Bliss Galvanized Iron Bird Bath Fountain with LED Lights

CH-F2023-003 08/2023

BUTTERFLY BLISS BIRD BATH FOUNTAIN

HDC-185

Review all assembly and care information carefully before using this product. Save this manual for future reference.



Page 1 / 2

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.

Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with

the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine

the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty

If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:

customerservice@sunnydazedecor.com, or via our contact us page at https://tiny.cc/SunnydazeContact

Purchase Date: / / Order/Customer Reference Number:

NOTE:

Refer to page 2 for more troubleshooting tips.

IMPORTANT NOTES:

• The water tubing is built into the fountain topper. Take care when

handling the water tube; detaching the water tube from the fountain

topper will damage the unit and void the warranty.

• Familiarize yourself with the flow control valve on the pump, maximum

(+) and minimum (-). This may need to be adjusted to achieve optimal

water flow.

• The lights and light cables are rated for contact with water. Use care

when handling the lights, jarring movements or dropping them may

cause the lights to burn out prematurely.

 

Fountain Topper 1

Fountain Body

with Built-in

Electric Submersible Pump

AC Adapter 1

ASSEMBLY

1. Carefully unwrap the pump that is inside the

fountain. Then, attach one of the light cables on the

pump to the light cable inside the water reservoir.

2. Connect the remaining two pump cables to the light

cables on the underside of the fountain topper.

3. Firmly attach the pump to the tubing that is built

into the fountain topper; it will be a tight t. Gently

place the topper on the fountain body.

4. Fill the water reservoir with enough water to

keep the pump fully submerged during operation.

NOTE: Ensure the water level does not exceed the

height of the metal tube inside the bowl, the rubber

seal will not completely prevent water from leaking.

5. Connect the AC adapter to the pump power cable.

6. Plug the adapter into a properly grounded GFCI

outlet.

Inspect packaging to ensure all

parts are accounted for before

disposing of packing materials.

Save the packing slip.

Summary of content (2 pages)

PAGE 1
Purchase Date: / / Order/Customer Reference Number: Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine the cause of defects and for future quality control. Register your warranty at https://tiny.
PAGE 2
Care & Maintenance • Some splashing may occur; adjust the flow rate on the pump if the water rate is too high. Do not use fountain in areas that can be damaged if water happens to splash or leak. • Some climates and weather conditions increase water evaporation, requiring water to be added more frequently. Frequently check water levels during times of high temperatures, wind, and long-term exposure to direct sunlight to ensure the pump remains underwater.