Instructions / Assembly

2
4
3
5
1
ASSEMBLY After completing each step, repeat the step for the opposite side of the hammock stand.
1. Connect the Top Support to the Diagonal Bars, as shown.
2. Slide two Plastic Feet onto the Base Bar.
3. Connect the Base Bars to the Diagonal Bars.
4. Connect the Cross Bar to the Diagonal Bars using the Bolt, Washer and Wing Nut Sets, as shown.
5. Attach the Hook Bolt to the center of the Cross Bar, as shown.
11/201935029 Page 1 / 2
UNIVERSAL MULTI
-
USE HAMMOCK STAND
HH-MHS
Read all assembly and care instructions carefully before using this product. Save these instructions for future reference.
Select a smooth, level surface to place the hammock stand.

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we
sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof
of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
Photos are used to determine the cause of defects and for future quality control. Register your warranty at
www.serenityhealth.com/warranty/
If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:
customerservice@serenityhealth.com, or via our contact us page at www.SerenityHealth.com/contact-us/
Purchase Date: / / Order/Customer Reference Number:
550
pounds
249 kg
Ensure all parts are
accounted for before
disposing of packaging.
(2) Hook Bolt, Washer, Wing Nut Set(2) Top Support
(4) Diagonal Bar
(2) Base Bar
(2) Cross Bar
(4) Plastic Foot
(4) Bolt, Washers, Wing Nut Set
(2) S-Hook
(2) Chain

Summary of content (2 pages)