Instructions / Assembly

5
-
PIECE ROMAN
BORDER FENCE
HMI-608
Read this manual carefully before use and save it for future reference.
Page 1 / 1 05/2020
Purchase Date: / / Order/Customer Reference Number:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-466 8, by email:
customerser [e-mail], or via our contact us page at ht tps://tiny.cc/SunnydazeContact
2-PERSON
INSTALLATION
RECOMMENDED
General Use & Care
INSTALLATION: Install into rm soil, installing into loose soil may cause the fence to lean or tip over. Do not install
fencing into rocks, sand as it may damage the finish.
CLEANING: Wet a soft cloth with clean water and wipe away dirt and debris.
SCRATCHES: The powder coating on the fencing is tough & durable but, even under normal use, some scratching is
inevitable. Scratches can be repaired with a rust-resistant paint. NOTE: damage caused by painting the fence will void
the product warranty.
WINTER CARE & STORAGE: Storing this item during winter, especially in locations with ice and snow is highly
recommended. Move it to an indoor location that is cool and dry. Covering with a breathable cover while in storage will
to help prevent dust build-up.
Troubleshooting
THE FENCE POST WON'T GO FAR ENOUGH INTO THE GROUND
• Make sure there are no obstacles within the soil such as rocks, tree roots, or pavement.
• The soil may be too dry. Soak the soil with water and try inserting the panels again.
Any modication to the product or failure to follow recommended care will void the product warranty.
Assistance may be required to
ensure the panels remain linked
during installation.
Insert the hook ends of the rst fence
panel into the holes on the second
fence panel.
Evenly insert the joined panels into
the ground, ensuring the panels
remain linked.
Take care when installing the
remaining sections to ensure the
hook ends remain in the holes.
INSTALLATION