Instructions / Assembly

Item No. KF-NSFP Natural Slate Fire Pit Table-30"
* Do not discard any of packaging until you have checked that you have all parts and pack of fittings.
* Keep children away during assembly.This item contains small parts which can be swallowed by children.
* Retain the assembly instructions for future reference.
Part list:
NO. Parts Qty.
A Mesh Cover 1
B Log Grate 1
CFire Bowl 1
D Table top 1
E Legs 4
F Leg ring 1
NO
Hardware
Qty
We stand behind our brand and the quality of the items we sell. We will send new parts, or replace products at our
discretion within the one year warranty period. Before we can help, you will need to provide proof of purchase with the
date of purchase and photos of the defective merchandise. We will use the photos to determine the cause of defect
and for future quality control.
Prior to assembly, please read these instructions carefully. We suggest you carry out assembly on a soft surface so as to avoid scratching the
paint. For all cast iron products,please note that because of the nature of cast metal, you may find roughness on the surface. This enhances
the beauty of the product and is not a defect.
ASSEMBLY INSTRUCTIONS SHEET
Thank you for choosing Sunnydaze Decor. If you have any questions, comments or concerns please feel free to
contact us by phone at: 888-881-4668, by email:customerservice@serenityhealth.com, or you could also email us
via our contact us page at: www.SerenityHealth.com/contact_us.php.
NO
.
Hardware
Qty
.
T1 Bolt (1/4"x5/8") 8
T2 Bolt (1/4"x1-1/8") 4
U Washer 20
V Nut 12
Y Wrench 1
Z Poker 1
Assembly Instructions:
Tools required: Wrench(Y) & Poker(Z) provided in package.
DO NOT FULLY TIGHTEN THE BOLTS BEFORE ASSEMBLING THE BASE.
1. Place table top(D) upside-down on the soft floor. Assemble 4 pcs of
legs(E) to table top (B) with 8 bolts(T1), 16 washers(U), 8 nuts(V)
2. Assemble Leg(E) to leg ring (F), with 4 bolts(T2), 4 washers(U) and
4 nuts(V) Then tighten all the screws.
then put the assembled frame right side up
3. Put fire bowl ( C ) on the assembled frame .
4. Put log grate (B) into fire bowl(C),put mesh screen(A) on fire bowl (C)
Now the assembly is complete.
Care And Maintenance:
1.To extend the life of your fire pit,clean the bowl after each use and cover the unit to protect it from the elements.
2.To maintain the coating color,cover the bottom of the fire bowl with small stones or sandstones before each use.
3.To maintain the finish,clean the surface by using a soft cloth.Do not use a metal brush.
4.If metal is scratched,the fire pit may need touch up painting.Ask your local paint store representative which paint is best for
your type of fire pit.To prevent rusting,coat the exposed surface immediately.
5.Although fire pits in general do well in adverse weather conditions,store it in an enclosed structure during the off-season.
6.Don't wipe the real slate top with acidic material.Coat the surface of natural slate with floor wax or liquid wax to protect
it from corrosion,oxidation and moisture.(Only available for firepit that with real slate top)

Summary of content (2 pages)