Instructions / Assembly

Page 1 / 2 02/2020LY445

TIER CORNER PLANT STAND

LAM-646

Read all assembly and care instructions carefully before using this product. Save this manual for future reference.



Purchase Date: / / Order/Customer Reference Number:

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.

Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with

the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine

the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty

If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:

customerser vice@nethealthshops.com, or via our contact us page at ht tps://tiny.cc/SunnydazeContact

Inspect packaging to ensure all

parts are accounted for before

disposing of packing materials.

CHOKING HAZARD — This item contains

small parts that can be swallowed. Keep

children away during assembly.

WARNING

  

A Shelf 3

B Leg 3

C JCBC 40mm 9

D Hex Key 1

HELPFUL HINT

This item was treated with teak oil at the factory. Apply a suitable wood oil at least once a year, or

when the wood looks particularly dry. Left untreated, the wood will weather to a silvery gray color.

PAGE 1
Purchase Date: / / Order/Customer Reference Number: Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine the cause of defects and for future quality control. Register your warranty at https://tiny.
PAGE 2
A D ASSEMBLY NOTE: Do not fully tighten any bolt until all bolts have been placed. 1. Connect Leg (B) to Shelf (A) by hand-tightening 3x JCBC 40mm (C). C 2. Repeat step 1 until all legs have been attached to shelves. 3. Gently tighten all the bolts using Hex Key (D). B USE & CARE SAFE USE: Place the stand on a flat, level surface. Make sure weight is evenly distributed, top-heavy plant stands may tip over. INSPECT: Periodically check assembly points and tighten fittings as necessary.