Installation Guide

Page 2 / 13IF-FSB
IMPORTANT SAFETY INFORMATION
WARNING
Read all instructions before using this heater!
This heater is hot when in use. To avoid burns, DO NOT touch hot surfaces.
Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3
feet (0.9m) from all sides of the heater.
If provided, use handles when moving the heater.
Extreme caution is necessary when any heater is used. NEVER leave the unit unattended while heater
is in use.
Ensure adequate safety measures are incorporated to protect infants/toddlers from touching hot
surfaces.
DO NOT operate any heater if the cord is damaged, the heater malfunctions, has been dropped, or
damaged in any manner. Discard heater or have it serviced by a certified professional.
DO NOT run the power cord under carpeting, throw rugs, runners, or similar floor coverings. DO NOT
route the power cord under furniture or appliances. Arrange power cord away from traffic area, and
where it will not be tripped over.
Connect to properly grounded outlet ONLY.
DO NOT insert or allow foreign objects to enter any ventilation or exhaust opening, as this may
damage the heater, cause electric shock or fire.
DO NOT block air intakes or exhaust in any manner as doing so could cause a fire.
DO NOT use on soft surfaces, like a bed, where openings may become blocked.
A heater has arcing or sparking parts inside and becomes HOT. DO NOT use it in areas where
gasoline, paint, or any flammable liquids are used or stored or where flammable vapors are present.
Only use this heater as described in this manual. Any other use may cause fire, electric shock,
personal injury or death.
ALWAYS plug heaters directly into a wall outlet/receptacle. NEVER use this unit with an extension
cord or relocatable power tap (power strip).
DO NOT install the heater near a bed, objects such as pillows or blankets can fall off the bed and be
ignited by the heater.
NEVER use this heater in bathrooms, laundry rooms, or any other location where the heater could
come in contact with water or be exposed to high moisture.
AVOID FIRE! It is imperative that the control compartments, circulating blower, and its passageway in
the replace is kept clean. Regularly inspect all air vents to make sure they are free from dust, lint, or
other blockages. Unplug the unit and clean with a vacuum ONLY. DO NOT rinse or get wet.
NEVER hang this unit on a wall directly below an electrical outlet.
Ensure clearances to combustibles are maintained when building a mantel or shelves near the
fireplace. Elevated temperatures on the wall or in the air around the fireplace can cause melting,
discoloration or damage to decorations, a TV or other electronic components.
ALWAYS mount onto the wall bracket before use. DO NOT set this unit on the floor or any other surfaces
to use.
NEVER use a wall mount bracket from another manufacturer.
WARNING
07/2020