Installation Guide

ManualsBrandsSunnydaze Decor ManualsElectric Fireplace InsertsSunnydaze Elegant Embers 20.25 in. Faux Log Electric Fireplace Insert Heater

ELEGANT EMBERS FIREPLACE

INSERT LOG HEATER

WARNING!

Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage

or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,

inadequate maintenance, or neglect of this product.

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.

Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with

the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine

the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty

If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:

customerservice@sunnydazedecor.com, or via our contact us page at https://tiny.cc/SunnydazeContact

Purchase Date: / / Order/Customer Reference Number:

WARNING:

Read and understand this entire manual, including all safety information,



serious personal injury.

FOR YOUR SAFETY

DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE LIQUIDS

OR VAPORS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE

Do not discard this manual.

Please retain this manual and your proof of purchase.

Page 1 / 10LOGF-20 05/2021

Summary of content (10 pages)

PAGE 1
Purchase Date: / / Order/Customer Reference Number: Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine the cause of defects and for future quality control. Register your warranty at https://tiny.
PAGE 2
Table of Contents Safety Statements and Warnings..........................................................................................3-5 Product Diagram....................................................................................................................... 6 Instructions for Power............................................................................................................... 7 Operation........................................................................................
PAGE 3
IMPORTANT SAFETY INFORMATION WARNING WARNING Read all instructions before using this heater. • This heater is hot when in use. To avoid burns, DO NOT touch hot surfaces. • Extreme caution is necessary when any heater is used. NEVER leave the unit unattended while heater is in use. • Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
PAGE 4
WARNING • DO NOT OPEN! Risk of electric shock! No user-serviceable parts inside! • NEVER modify this heater. Doing so could result in personal injury or property damage. Modification of this fireplace completely voids all warranties. • ALWAYS turn this heater off before unplugging it from the outlet. • ALWAYS disconnect this unit from the power supply before performing any assembly or cleaning, or before relocating the electric fireplace. • NEVER leave this heater unattended.
PAGE 5
ALWAYS OBSERVE THESE SAFETY PRECAUTIONS WHEN OPERATING YOUR ELECTRIC HEATER ALWAYS Read all instructions before operating. ALWAYS Locate your electric heater away from furniture or loose hanging drapes. ALWAYS Keep the rear grill away from walls or drapes so as not to block the air intake. (If applicable) ALWAYS Unplug electric heater when not in use. ALWAYS Use electric heater on a flat dry surface. ALWAYS Use on 110-120 volt 60Hz AC power supply.
PAGE 6
Product Diagram HEATER Control Panel Master Switch Enables all functions on unit and remote Flame Button Adjust flame brightness Timer Button Set timer mode Heater Button Turn heat On/Off Air Outlet Display Panel REMOTE CONTROL Power Button Powers the appliance On/Off Heater Button To turn heat On/Off REMOTE NOTICE Power Heater Timer Timer Button For setting the timer mode Flame Flame Button To set flame brightness Pull the insulating film out of the battery cover before using the remote control.
PAGE 7
Instructions for Power AC120-Volt/60Hz circuit with a properly grounded outlet is required. Operating the heater on a dedicated circuit is highly recommended. Other appliances on the same circuit may cause the circuit breaker to trip or the fuse to blow when the heater is operating. The unit comes standard with a two wire cord exiting from the rear of the appliance.
PAGE 8
Button Function ON: Enables control panel and remote control functions. OFF: Disables control panel and remote control function. Turns off the heat and POWER (REMOTE ONLY) flame effect. TIMER Action and Indication 1. Press once. The heat and flame effect will be on. 2. Press again, heat and flame effect will turn off. The fan will continue to run for 60 seconds to disperse remaining heat from inside the unit. TIMER button: Controls the timer settings Press button until desired setting is reached.
PAGE 9
Maintenance Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside! ALWAYS turn the heater OFF and unplug the power cord from the outlet before cleaning, performing maintenance, or moving this fireplace. Failure to do so could result in electric shock, fire, or personal injury. Electrical and Moving Parts: • The fan motors are lubricated at the factory and will not require lubrication. • Electrical components are integrated in the fireplace and are not serviceable by the consumer.
PAGE 10
Troubleshooting Problem Possible Cause Solution The appliance does not The overheat protection device turn on when the "POWER" has been triggered. button is pushed. The unit may have tripped your circuit breaker. The outlet may be faulty. Turn all controls off, unplug the appliance, allow to cool for at least 10 min plug back in and restart. Turn the unit off and unplug it. Locate the tripped switch in your circuit breaker box. Turn the switch all the way off and then turn it back on.