Instructions / Assembly

ManualsBrandsSunnydaze Decor ManualsGarden CenterGreen Heavy-Duty Dumping Utility Cart with Folding Sides and Liner Set

DUMPING UTILITY CART

WITH REMOVABLE SIDES

Read assembly instructions carefully and follow the care instructions.



Page 1 / 5

HELPFUL HINT

Sunnydaze Decor advises reading this manual fully, and assembling the utility cart soon after purchase.

Check that all parts are accounted for and familiarize yourself with the assembly before beginning.

Save this manual for future reference.

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.

Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with

the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine

the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty

If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:

customerservice@sunnydazedecor.com, or via our contact us page at https://tiny.cc/SunnydazeContact

Purchase Date: / / Order/Customer Reference Number:

LW-DUCL 10/2020

  

Bed 1

Side Panel 2

Front Panel 1

Back Panel 1

E Rear Axle Support 2

F Hand Coupler 1

G Wheel 4

H Bottom Frame 1

I Center Front Axle Brace 1

J Steering Connector 1

K Yoke 1

L Front Axle 1

M Handle 1

N Rear Axle 1

660

pounds

299 kg

  

M8 x 60 Hex Bolt 1

P M8 x 20 Hex Bolt 1

Q M8 x 16 Hex Bolt 11

R Handle Pin 1

S M12 Lock Nut 2

T M8 Lock Nut 13

U Cotter Pin 4

V Fence Assembly Pin 8

W M16 Washer 2

X M12 Washer 2

Y M8 Washer 13

Inspect packaging to ensure all

parts are accounted for before

disposing of packing materials.

WARNING

CHOKING HAZARD — This item contains small parts that can be

swallowed by children. Keep children away during assembly.

(not included)

Socket Wrench

Adjustable Wrench

Summary of content (5 pages)

PAGE 1
Purchase Date: / / Order/Customer Reference Number: Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine the cause of defects and for future quality control. Register your warranty at https://tiny.
PAGE 2
ASSEMBLY Do not tighten hardware until all components have been loosely assembled. If the hardware is tightened too soon, mounting holes may not align, and parts may not easily fit together. IMPORTANT: Lock nuts must be installed with the nylon insert facing outward. STEP 1 A: 1 H: 1 Lay Bed (A) face-down on a clean, flat surface. Slide the flat side of Bottom Frame (H) towards the release handle on Bed (A), ensuring the ends of the handle go through the holes on the end of the bottom frame.
PAGE 3
STEP 5 I: 1 Q: 2 Y: 2 T: 2 Align the two holes on Center Front Axle Brace (I) over the center of Bottom Frame (H). Secure by handtightening 2x Hex Bolt (Q), 2x Washer (Y), and 2x Lock Nut (T). NOTE: the opposite end of the brace must be on top of the front axle, as shown. STEP 6 K: 1 Y: 1 T: 1 Place Yoke (K) onto the front axle so that the single hole slides over the pre-attached bolt on Front Axle Brace (L). Loosely secure by hand-tightening Washer (Y) and Lock Nut (T).
PAGE 4
STEP 9 Ensuring the valve stem is facing outward, place Wheel (G) onto Rear Axle (N). Place 1x Washer (W) onto the rear axle and secure using 1x Cotter Pin (U). Repeat on the opposite side. G: 2 BACK U: 2 W: 2 FRONT G: 2 X: 2 Ensuring the valve stem is facing outward, place Wheel (G) onto Front Axle Brace (L). Place 1x Washer (X) onto the front axle and hand-tighten 1x Lock Nut (S). Repeat on the opposite side. S: 2 STEP 10 B: 1 C: 1 D: 2 V: 8 Flip the cart upright.
PAGE 5
Care & Maintenance Do not use harsh chemicals or abrasive materials to clean the cart. Inspect: Periodically check tire pressure; tire pressure should be maintained between 36-40 PSI. Frequently inspect hardware and tighten any loose fittings. Sun Exposure: All materials will eventually fade and degrade from sun exposure. Maintain the color and quality of the cart by storing it indoors when not in use.