Instructions / Assembly

ManualsBrandsSunnydaze Decor ManualsOtherBlack Steel Heavy-Duty Utility Cart with Folding Sides

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion,

within the one-year warranty period. Proof of purchase, with the date of purchase as well as photos of the defective merchandise, must be provided. If you have any

questions, comments or concerns please feel free to contact us by phone at: 888-881-4668. You may also contact us by email: customerservice@serenityhealth.com

or via our webpage at: www.serenityhealth.com/contact-us/

INSTRUCTIONS

1.) Remove parts from carton. Place carton on flat surface. Assemble cart while on the carton to

avoid scratching or damaging the parts.

2.) Tools Needed: Socket wrench, an adjustable crescent wrench.

Parts List

A. Bed (1)

B. Side Panels (2)

C. Front Panel (1)

D. Back Panel (1)

E. Rear Axle Support Assembly (2)

F. Hand Coupler (1)

G. Wheels (4)

H. Bottom Support (1)

I. Center Front Axel Brace (1)

J. Steering Connector (1)

K. Yoke (1)

L. Front Axle Brace (1)

M. Handle (1)

N. Rear Axle (1)

Hardware List

O. M8 x 60 Hex Bolt (1)

P. M8 x 20 Hex Bolts (1)

Q. M8 X 16 Hex Bolt (11)

R. Handle Pin (1)

S. M12 Nylon Nut (2)

T. M8 Nylon Nut (13)

U. Cotter Pin (4)

V. Fence Assembly Pins (4)

W. M16 Washers (2)

X. M12 Washer (2)

Y. M8 Washers (13)

Summary of content (4 pages)

PAGE 1
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion, within the one-year warranty period. Proof of purchase, with the date of purchase as well as photos of the defective merchandise, must be provided. If you have any questions, comments or concerns please feel free to contact us by phone at: 888-881-4668. You may also contact us by email: customerservice@serenityhealth.
PAGE 2
3.) Turn (Part A) BED Upside down. 4.) Attach FRONT AXLE BRACE (PART L) to BOTTOM SUPPORT (PART H) middle bar. 5.) Attach STEERING CONNECTOR (PART J) ends to REAR AXLE SUPPORT (PART E) using M8X16 HEX BOLT, M8 WASHER, and M8 NYLON NUT (PART Q, Y and T) 6.) Attach STEERING CONNECTOR (PART J) twohole flat side to BOTTOM SUPPORT (PART H). Other end will attach to middle of the FRONT AXLE BRACE (PART L). (Do not secure yet) 7.
PAGE 3
12.) Place FRONT TIRES (PART G) onto FRONT AXLE BRACE (PART L), secure with M12 WASHER (PART X) and M12 NYLON NUT (PART 13.) Place BACK TIRES (PART G) onto REAR AXLE (PART N), secure with COTTER PIN (PART U). 14.) Thread M8X60 HEX BOLTS (PART O) between YOKE (PART K), HANDLE COUPLER (PART F), and HANDLE (PART M) and secure with M8 NYLON NUT (PART T). 15.) HANDLE GRIP (PART M) attaches to HANDLE BAR (PART M) with HANDLE PIN (PART R). 16.
PAGE 4
IMPORTANT SAFETY INSTRUCTIONS A. B. C. D. E. F. G. H. MAX LOAD: 600 lbs. NEVER OVERLOAD THIS CART DO NOT Inflate tires more than 40 PSI DO NOT Operate if any part is damaged or broken Lower fence rails when loading large items onto cart. Distribute load evenly in cart bed DO NOT use on steep inclines where tipping may occur DO NOT allow children to use this cart. IT IS NOT A TOY! It is recommended that you DO NOT modify or use this cart for any application other than that for which it was designed.