Instructions / Assembly

ASSEMBLY INSTRUCTIONS SHEET
Model No. 610037D
Prior to assembly, make sure all parts are present. Compare parts with package contents list and diagram above. If any part is missing or
damaged, do not attempt to assemble the product. Contact customer service for replacement parts.
Part list:
NO.PartsQty.NO.HardwareQty.
AHandle of Fire Screen1TBolt(1/4"x5/8")10
BFire Screen1UWasher5
C1/4 Top Ring4VNut5
DFire Bowl1XAlan Wrench1
EBracket4ZPoker1
FGrate1
GLegs3
YRain Cover1
WARNING:
FOR OUTDOOR USE ONLY! NEVER LEAVE FIRE UNATTENDED!
Supervise children and pets when the fire pit is in use.
DO NOT
use this unit on a wood deck or on combustible surface such as dry grass,leaves,mulch,etc,and place it no closer than 2 feet (60 cm)
from
walls
during
use.
CAUTIONS:
1.Burn
only
wood
or
charcoal
in
the
fire
pit.
DO
NOT
use
gasoline
or
kerosene
to
start
the
fire
in
your
fire
pit.
Light
the
fire
using
a
match
or
lighter.
2.
Do not
touch the outside of your fire pit while it is in use.
3.Use the poker to move the handle of the fire screen during
use.
4.Always
have
a
fire
extinguisher
handy
when
burning.
5.
Do not
extinguish your fire pit with water. The water may cause distortion,
rusty or flaking paint. Use fire extinguisher or allow attended fire to die
out
on
its
own.
6.
Do not
use in inclement weather.
Assembly
Instructions:
Tools required:Alan Wrench(X) included.
1. Assemble 3 x Legs (G) to Fire Bowl (D) with the 6 Bolts (T).
2. Assemble 1 x 1/4 Top Ring(C) to Fire Bowl(D) with 1xBolt(T)
1x Bracket (E),1xWasher (U) and 1x Nut(V) slightly, Don't tighten.
3. Connect the second 1/4 Top Ring(C) and the hole of
the assembled 1/4 Top Ring (C) , then assemble the
second
1/4 top ring (C) to Fire Bowl (D) with 1x Bolt (T) and 1xBracket(E)
1xWasher (U) and 1x Nut(V) slightly, don't tighten.
4. Repeat Step 3 to assembly the rest 1/4 Top Rings (C) to Fire bowl( D).
Adjust the bracket horizontal, then tighten all the
bolts.
5. Put the Grate (F) into bottom of Fire Bowl(D)
6. Assemble handle of Fire Screen (A) to the Fire Screen (B)
with 1washer(U)and 1 nut(V). then put the Fire Screen (B) on the Brackets (E).
7.When not in use,please cover Rain cover(Y) on the whole fire pit.
Care
And
Maintenance:
1.To extend the life of your fire pit, clean the bowl after each use and cover the unit
to protect it from the elements.
2.To maintain the coating color, cover the bottom of the fire bowl with small stones
or sandstones before each use.
3.To maintain the finish, clean the surface by using a soft cloth. Do not use a metal brush.
4.If metal is scratched, the fire pit may need touch up painting. Ask your local paint store
representative which paint is best for your type of fire pit. To prevent rusting, coat the
exposed surface immediately.
5.Although fire pits in general do well in adverse weather conditions, store it in an
enclosed structure during the off-season.
Outdoor Classics Bronze Crossweave Firebowl Fire Pit