Instructions / Assembly

ManualsBrandsSunnydaze Decor ManualsGarden CenterYellow Steel Utility Cart with Removable Folding Sides

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be

sent at our discretion, within the one-year warranty period. Proof of purchase, with the date of purchase as well as photos of the defective

merchandise, must be provided. If you have any questions, comments or concerns please feel free to contact us by phone at: 888-881-4668. You

may also contact us by email: customerservice@serenityhealth.com, or via our webpage at: www.serenityhealth.com/contact-us/

INSTRUCTIONS

1.) Remove parts from carton. Place carton on flat surface. Assemble cart while on the carton to avoid

scratching or damaging the parts.

2.) Tools Needed: Socket wrench and adjustable crescent wrench

Parts List

A. Bed (1)

B. Side Panels (2)

C. Front Panel (1)

D. Back Panel (1)

E. Wheels (4)

F. Front Axle Support Assembly (4)

G. Yoke (1)

H. Front Strut (1)

I. Front Axle Connection Bar (1)

J. Rear Axle Support Assembly (1)

K. Rear Axle Brace (2)

L. Handle (1)

Hardware List

M. M12 Washers (4)

N. M12 Nylon Nuts (4)

O. M8 Washers (10)

P. M8 Nylon Nuts (10)

Q. Plastic Spring Washers (4)

R. M8 x 60 Hex Bolt (1)

S. M8 x 20 Hex Bolts (2)

T. M8 x 20 Carriage Bolts (7)

U. Fence Assembly Pins (8)

V. Cotter Pin (1)

Garden Cart

with Removeable Folding Sides

Summary of content (5 pages)

PAGE 1
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion, within the one-year warranty period. Proof of purchase, with the date of purchase as well as photos of the defective merchandise, must be provided. If you have any questions, comments or concerns please feel free to contact us by phone at: 888-881-4668. You may also contact us by email: customerservice@serenityhealth.
PAGE 2
3.) Turn (Part A) BED Upside down. 4.) Attach (PART J) REAR AXLE SUPPORT ASSEMBLY to rear of bed using (PART T) M8X20 CARRIAGE BOLTS, (PART O) M8 WASHERS and (PART P) M8 NYLON NUTS. 5.) Attach (PART K) Left and Right REAR AXLE BRACES to (PART A) BED using (PART T) M8X20 CARRIAGE BOLTS (PART O) M8 WASHERS AND (PART P) NYLON NUTS per side. 6.) Attach (PART G) the YOKE and FRONT AXLE SUPPORT ASSEMBLY (PART F) by loosening middle nut to slide Yoke onto long bolt.
PAGE 3
8.) Attach (PART F) FRONT AXLE SUPPORT ASSEMBLY to FRONT OF BED using (PART T) M8 x20 CARRIAGE BOLTS, (PART O) M8 WASHERS and (PART P) M8 NYLON NUT. 9.) Attach (PART H) FRONT STRUT to (PART A) BED using (PART T) M8 x 20 CARRIAGE BOLT, (PART O) M8 WASHER, and (PART P) M8 NYLON NUT. Tighten bolts fully. 10.) To attach the wheels, first put (PART P) PLASTIC SPRING WASHER on axel followed by (PART E) WHEEL and secure with (PART L) M12 WASHER and (PART M) M12 NYLON NUT.
PAGE 4
11.) Turn cart over onto wheels. 12.) Secure (PART L) HANDLE to (PART G) YOKE using (PART R) M8 X 60 HEX BOLT, (PART O) M8 WASHER and (PART P) M8 NYLON NUT. Tighten bolts fully. 13.) One at a time, attach (PART B) SIDE PANELS by aligning the hinges, and sliding (PART U) ASSEMBLY PINS in the hinge hole.
PAGE 5
14.) To lock the (PART B) SIDE PANELS in place, hold (PART B) SIDE PANEL in the upright position. Rotate the “side panel lock lever” from the upright position, to the downward position. Be sure to capture the “side panel hook” while rotating. 15.) To fold cart sides down rotate the “side panel lock levers” into the upright position and fold panels down. 16.) If desired, you may store cart on its end. Please exercise caution to prevent cart from falling over. IMPORTANT SAFETY INSTRUCTIONS A. B. C. D. E.