Installation Guide
FLC 04/2023 Page 2 / 3
WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,
• Do not overload the log rack — holds approximately 1/8 face-cord of firewood.
• Ensure fittings are tight before use. Periodically check and tighten hardware as necessary.
• Protect the unit from outdoor elements with a cover.
• Do not allow children to play with, on, or around the log rack.
• Keep unit a safe distance from heat sources such as, but not limited to, fire pits and fireplaces.
• Never transport or store flammable liquids (gasoline, kerosene, propane, etc.) on this unit.
SAFETY STATEMENTS & WARNINGS
If you experience issues with assembly or the product was damaged during shipping,
please contact our customer service team through one of the methods mentioned at the top of page 1.
Please have the item number and order information ready to expedite response time.
Safety Precautions & Care
1. Do not exceed the capacity of the cart. The height of the wood stack must not exceed the height of the
handle.
2. Load the cart evenly, ensuring the heaviest part of the load is on the bottom of the cart. If the load in the cart
is unbalanced or the load is too high it could possibly tip and cause injury and/or product damage.
3. For best results, only use the cart on at surfaces with fully inated tires. Maximum tire ination: 30 PSI
4. Do not use the cart over rough ground, over curbs, stairs, etc. Use ramps whenever possible.
5. Ensure the load is stable before attempting to move the cart. Wood may shift during transport; if the wood
begins to shift, stop immediately and stabilize the load.
6. Take extra time and care when transporting wide loads.
7. NEVER allow people to ride on the cart.
8. NEVER park the cart on an incline. If there is a slight incline, the wheels must be chocked.
9. NEVER alter the construction of the cart in any way, or use it for anything other than its intended purpose.
10. Use a soft cloth to wipe clean. Store in a clean, dry place when not in use.
11. To protect the integrity of the item, cover when not in use.
12. The powder coating on this unit is tough and durable, however, scratches are inevitable (even under
normal use). To avoid excessive rust, keep scratched areas dry. Scratches can be repaired with a rust-
resistant paint (not included).
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS
CAUSED BY THE APPLICATION OF CHEMICAL TREATMENTS, PROTECTIVE COATINGS, OR TOUCH-UP PAINT.