Instructions / Assembly

4. Feed the LED light cord through the hole in the
lower column and through the tube in the lower
reservoir. Connect the water tube to the pump.
Align the lower column with the lower reservoir and
twist to lock.
3. Ensuring the hose remains straight, place the
topper onto the upper reservoir and twist to secure.
Then, connect the lower column to the upper
reservoir.
1. Place lower reservoir on top of the pedestal and
twist the reservoir clockwise to secure.
2. Feed the pump cable through the plasc tube in
the reservoir, and through the channel on boom
of the pedestal.
INSTRUCTIONS
SL-0213
Read carefully & save instrucons for future reference.
PARTS
LOWER
RESERVOIR
PEDESTAL
Ensure all parts are accounted for before disposing of packaging.
SL0213 INSTRUCTIONS (PAGE 1 / 4)
SL-0213B/E/W 12/2022
FOUNTAIN ASSEMBLY
Select a level locaon to place the fountain. Assemble
components on a smooth, clean surface to avoid scratching
or damaging the nish.
NOTE: The water tubing is built into the topper. Take care
when handling the water tube; detaching the water tube
from the topper will damage the fountain and void the
product warranty.
PUMP
PLASTIC TUBE
PUMP
POWER
CABLE
LED LIGHT CABLE
LED LIGHT
WATER
TUBE
UPPER
RESERVOIR
TOPPER
COLUMN
In Solar Panel Box:
(1) Pump with 5m Cable
(1) LED Light with 5m Cable
(1) Solar Panel, Bracket, Tube, Spike
(1) Topper
(1) Upper Reservoir
(1) Column
(1) Lower Reservoir
(1) Pedestal
SOLAR PANEL ASSEMBLY
6. Insert the spike into the ground. Posion the solar
panel to face south (in the northern hemisphere)
to make the most of daylight hours. It is important
to angle the solar panel towards the sun when the
sun is at its highest point. Ensure trees, shrubs, or
buildings do not shade the solar panel.
8. Fill the fountain reservoirs with water, ensuring
the pump will remain completely submerged during
operaon; approximately 3 gallons.
Refer to the Solar Panel Operaon informaon on
Page 3.
7. Connect the pump and LED light cables to the
solar panel (charger sold separately).
PUMP
Continual ON
until all battery power is used
LIGHT
CHARGER
(sold separately)
4-Hour Timer
(on for 4 hours only)
Daily 4-Hour Timer
(on for 4 hours, off for 20 hours,
repeates daily at the same time)
Battery Low
(battery pack needs
to be charged)
Power
on/off
Timer
modes
5. Connect the bracket, tube, and spike and aach
the solar panel to the bracket as shown.
BRACKET
TUBE
BRACKET
SPIKE
SOLAR PANEL
Over me, the nish may gradually mellow in color;
this is part of the natural aging process.
INCORRECT
CORRECT
SL0213 INSTRUCTIONS (PAGE 2 / 4)
12/2022SL-0213B/E/W
NOTE:
The LED light is designed to
only illuminate at night.