Instructions / Assembly

09/2019MZ14871BB Page 1 / 2

FLORAL MOTIF CERAMIC 3

TIER OUTDOOR WATER FOUNTAIN

WITH LED LIGHTS

SSS-399

Read the assembly instructions carefully and follow the care instructions. Save these instructions for future reference.

Select a smooth, level surface to place the fountain.



*2 people are recommended to safely assemble this product.

 

Ball Topper 1

Small Tier with LED Light Ring 1

Medium Tier with LED Light Ring 1

Large Column 1

Large Tier with

Electric Submersible Pump

AC Adapter 1

Pedestal 1

Water Tube 1

Rubber Washer 1

ASSEMBLY

1. Place the large tier with the built-in electric submersible pump onto the pedestal and twist the tier clockwise

to lock into place.

2. Run the long pump power cable through the tube in the large tier and through the pedestal. Pull the cord out

through the groove in the back-side of the pedestal.

3. Assemble the water tube and attach it onto the pump making sure the end with the rubber washer is on top.

Remove the rubber washer and save it for use during Step 7.

4. Slide the large column over the water tube and gently place the large column onto the large tier. Run the

light splitter cable (attached to the pump) up through the large column.

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we

sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof

of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.

Photos are used to determine the cause of defects and for future quality control. Register your warranty at

ww w.serenityhealth.com/warranty/

If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:

customerservice@serenityhealt h.com, or via our contact us page at www.SerenityHealth.co m/contact-us/

Purchase Date: / / Order/Customer Reference Number:

Inspect packaging to ensure all parts are accounted for

before disposing of packaging.

NOTE: There is a polyurethane foam lter/splash guard inside the ball topper;

this lter helps control water ow to prevent splashing. Do not remove or discard

this lter/splash guard.

PAGE 1
Purchase Date: / / Order/Customer Reference Number: Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine the cause of defects and for future quality control. Register your warranty at www.serenityhealth.
PAGE 2
5. *Run the light cable from the small tier down through the medium tier. Slide the tiers over the water tube and firmly connect the light cables from both tiers to the light splitter cable (attached to the pump). 6. Gently place the tiers onto the large column, ensuring all cables are inside the fountain. Do not allow the cables to get caught/pinched between the tiers as this can damage the wires. 7. Place the rubber washer (from step 3) on the water tube.