Instructions / Assembly

ManualsBrandsSunnydaze Decor ManualsCitronella Torches65 in. Resin Pineapple Outdoor Torch 3-in-1 Brown (2-Pack)

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the

items we sell. Replacement parts or products will be sent at our discretion within the 1-year

warranty period. Proof of purchase, with the date of purchase as well as photos of the

merchandise defect, must be provided. Photos are used to determine the cause of defects

and for future quality control. Register your warranty at www. serenityhealth.com/warranty

If you have any questions, comments or concerns, feel free to contact us by phone at

888-881-4668, by email: customerservice@serenityhealth.com

, or via our contact us

page at www.SerenityHealth.com/contact-us/

3-in-1 TORCH

• Read and understand these instructions.

• Do not tip torch as fuel can spill before use and can cause fire or serious injury.

• For outdoor use only.

• Failure to follow warnings and instruction may result in serious injury or destruction of property.

• Keep out of reach of children or pets.

• Do not leave a burning torch unattended.

• Do not use gasoline or other flammable liquids.

• Do not move while burning.

• To prevent burn injuries, snuff flame, and allow to cool down before handling.

• Refill torch before use, and only refill when torch is cold, wait at least 30 minutes before refilling or cleaning.

• Keep clothing, hair, and body parts away from flame - may cause serious burns.

• DO NOT place torch under covered shelter or umbrella, or near other combustibles, such as but not limited to wood

structures, clothing, dry vegetation.

• Use in well-ventilated area.

• Do not use torch fuel with any other product vessel.

• Hot while in use.

Product Box Contents

A. 2 Snuffers

B. 8 Pole Sections

C. 2 Decorative Vessels (shapes may vary)

D. 2 Fuel Canisters

(Include wick, flame guard, and canister)

E. 2 Mounting Clamps

F. 2 Torch Stakes

DANGER

Torch Fuel is harmful or fatal if swallowed. Contains petroleum hydrocarbons. Combustible. Read Warning on torch fuel bottle carefully.

WARNING

SAVE THESE WARNINGS & INSTRUCTIONS FOR FUTURE REFERENCE

Summary of content (5 pages)

PAGE 1
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine the cause of defects and for future quality control. Register your warranty at www.serenityhealth.
PAGE 2
Torch Assembly Figure 1 1. Assemble the pole sections to desired height (Figure 1). *Note: The pole section with the snuffer/chain is the top pole section. 2. Attach the decorative vessel to the pole assembly (Figure 2). 3. Select installation method (below) and install as noted. Torch Installation Options Torch stability depends on many conditions, always check your torches to ensure they are in a sturdy, stable location and properly installed before filling and lighting.
PAGE 3
Deck-Mount Installation 1. Assemble pole sections. 2. Attach decorative vessel with fuel canister. 3. Attach the deck rail mounting bracket to the desired location. 4. Position the torch in the deck rail mounting bracket. *Note: Do not place torch under covered shelter or umbrella, near pedestrian traffic or combustibles such as, but not limited to, wood structures, fuel, clothing, etc. Tabletop Torch: 1. Use the decorative vessel with the fuel canister for a tabletop torch.
PAGE 4
Filling and Lighting 1. Remove the fuel canister from the decorative vessel. 2. Unscrew metal flame guard from the fuel canister. 3. Fill the decorative canister to 1/2 inch (13 mm) below the canister seam with torch fuel (Figure 3). - DO NOT OVERFILL 4. Wipe away any spilled fuel before lighting. 5. Reattach the metal flame guard to the fuel canister (Figure 4). - DO NOT OVERTIGHTEN 6. Place fuel canister into the decorative vessel. 7. Allow wick to become saturated with fuel before lighting. 8.
PAGE 5
Wick Replacement 1. Carefully remove the wick from the flame guard and properly dispose of the wick in accordance with local laws and regulations. 2. Insert the new torch wick (Figure 7) and position the wick with 3/4 inch of the wick exposed. 3. Trim as needed. Figure 7 Storage 1. 2. 3. 4. 5. Store fuel in original fuel bottle with cap secured. Dispose of any unwanted fuel in accordance to local laws and regulations. Disassemble pole sections and/or other installation components prior to storing.