Instructions / Assembly

Figure 2
Figure 1
Torch Assembly
1. Assemble the pole sections to desired height (Figure 1).
*Note: The pole section with the snuffer/chain is the top pole section.
2. Attach the decorative vessel to the pole assembly (Figure 2).
3. Select installation method (below) and install as noted.
Torch Installation Options
Torch stability depends on many conditions, always check your torches to ensure they
are in a sturdy, stable location and properly installed before filling and lighting. Sunnydaze
Decor products offer a variety of installation options for multiple backyard environments.
For best results, select one of these recommended torch installation options.
1. Into Ground 2. Torch Stake 3. Mounting Clamp 4. Tabletop
In-Ground/Torch Stake Installation
1. Assemble the pole sections as desired to create the torch height you prefer.
2. Insert the torch pole directly into the ground or with the provided torch stakes – approximately 6 inches or until
the torch is sturdy and will not tip over once filled.
*Note: Do not place torch under covered shelter or umbrella, near pedestrian traffic or combustibles such as,
but not limited to, wood structures, fuel, clothing, etc.
OR