Instructions / Assembly
Page 1 / 1 05/2020
Purchase Date: / / Order/Customer Reference Number:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:
customerservice@nethealthshops.com, or via our contact us page at https://tiny.cc/SunnydazeContact
TROUBLESHOOTING
• Ensure the power button is turned to the 'ON' position.
• Make sure the batteries are installed correctly, observe polarity and ensure
contact is good.
• Install new batteries (not included). Do not mix old and new batteries.
RUSTIC TWINKLING SNOWMAN
STATUE WITH LED LIGHTS
XCA-425
Read this manual carefully before use and save it for future reference.
• For indoor use only.
• For decorative purposes only. This item is not a toy.
• Do not use harsh chemicals or abrasive materials to clean the statue.
• Remove batteries if unit is being stored or if it will not be used for long periods of time.
• Promptly remove expelled batteries. Do not mix old and new batteries. Mixing batteries could cause leakage of the acid inside batteries,
damaging the unit.
• LED lights are not replaceable.
• Manufacturer is not liable for damage or personal injury caused by improper use, inadequate maintenance or neglect of this product.
SAFETY STATEMENTS & WARNINGS
INSTALLING & CHANGING BATTERIES
1. Make sure the power switch is turned to the 'OFF' position.
2. Use a screwdriver to loosen the screws on the battery housing cover.
3. Gently remove the battery housing cover.
4. Paying attention to the positive and negative terminals, gently insert two
'AA' batteries (not included).
5. Replace the battery cover and fasten the screws.
6. Turn the power switch to the 'ON' position.
CLEANING
• Ensure the power button is turned to the 'OFF' position.
• Gently dust with a soft, dry cloth or a clean feather duster.
Phillips Screwdriver