Instructions / Assembly
SAFETY STATEMENTS & WARNINGS
Base
(style may vary)
Pole
Adapter
Threaded Knob
Washer
Bolt
ASSEMBLY
• Place Washer (E) onto Bolt
(F) and insert through the
bottom of Base (A).
• Attach Pole (B) to Base (A).
• Screw Threaded Knob (D)
into Pole (B).
• Adjust adapter (C) to fit your
umbrella pole.
If Pole (B) feels unstable, secure it
more rmly by holding the pole and
tightening the bolt with a wrench
(not included). Do not over-tighten
the bolt as it may strip the bolt and
damage the product.
• This is not a freestanding umbrella base; the base must be used
under a table designed to support an umbrella pole.
• Check for, and empty, standing water from the base.
• Do not stand on the base ─ it is only meant to support the weight
of an umbrella.
• Store in a dry location when not in use ─ do not leave exposed to
inclement weather.
• Clean with mild soap and water ─ use of harsh chemicals may
damage the product and will invalidate the product warranty.
• Do not over-tighten the adjustable handle as it may damage your
umbrella pole.
• Close patio umbrellas when not in use and remove umbrellas
during high-wind conditions; the base is designed only to support
an umbrella and will not protect your umbrella from wind damage.
Correct Use Incorrect Use
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
Page 1 / 11/2021XG3013
ROUND CAST IRON UMBRELLA BASE
YUK-093
Read the assembly instructions carefully and follow the care instructions. Save this document for future reference.
A
Base
(style may vary)
1
B Pole 1
C
Adapter 1
D
Threaded Knob 1
E
Washer 1
F
Bolt 1
Ensure all parts are
accounted for before
disposing of packaging.
To prevent small parts from being lost during shipping,
the washer and bolt are loosely attached to the bottom
of the pole. The threaded knob may be inside the pole.