SUNON SPECIFICATION FOR APPROVAL CUSTOMER : DESCRIPTION : AXIAL AC FAN DIMENSIONS : 120X120X38 mm MODEL : DP201A P/N : 2123HSL.GN SUNON SPEC. NO. : APPROVAL NO. : APPROVED BY : A12003230G-00 (AUTHORIZED) DRAWN Yinina 06/03 CHECKED Kiddy March APPROVED Jacky SPEC.NO A12003230G-00 ISSUE DATE 04. 30. 2005 EDITION 1 REVISION DATE 06. 03. 2013 E.SPEC 建準電機工業股份有限公司 SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. 12FL., 120 CHUNG CHENG 1ST RD.
SUNON AXIAL AC FAN MODEL : DP201A P/N : 2123HSL.GN CHARACTERISTICS 1. Motor Design : Reliable Shaded-Pole Motor Construction. 2. Insulation Resistance : 500Megohms minimum at 500 VDC. 3. Dielectric Strength : 1800 VAC for one second . 4. Motor Protection : Impedance protected. 5. Noise Level : Measured in a semi-anechoic chamber with background noise level below 15 dB(A). The fan is running in free air with the microphone at a distance of one meter from the fan intake. 6.
SUNON SPECIFICATIONS MODEL: DP201A P/N : 2123HSL.GN 1-1. Rated Voltage : 220-240 VAC 50/60 Hz 1-2. Operating Voltage Range : 185-245 VAC 1-3. Starting Voltage : 185 VAC(25 deg. C POWER ON/OFF) 1-4. Rated Speed : 2550/2900 RPM ± 10% 1-5. Air Delivery : 85/105 CFM 1-6. Static Pressure : 0.25/0.30 Inch-H2O 1-7. Rated Current : 0.125/0.11 AMP 1-8. Rated Power : 20/19 WATTS 1-9. Noise Level : 43/48 dB(A) 1-10. Direction of Rotation : Counter-clockwise viewed from front of fan blade 1-11.
SUNON MODEL : DP201A P/N : 2123HSL.GN PERFORMANCE CURVES STATIC PRESSURE mm-H2O Inch-H2O 12 0.40 50 HZ 60 HZ 8 0.20 4 0 CFM 0 0 50 100 1.42 2.84 m3/min SPEC.NO A12003230G-00 REVISION DATE 06. 03. 2013 建準電機工業股份有限公司 ISSUE DATE 04.30. 2005 E D I T I O N 1 SUNONWEALTH ELECTRIC D.C.C. MACHINE INDUSTRY CO., LTD PAGE 4 OF 9 2013.07.
SUNON MATERIAL 2. Material 2-1. Frame : DIE-CAST ALUMINUM 2-2. Impeller : Thermoplastic PBT of UL 94V-0 2-3. Lead Wire : UL3266, 24 awg, GRAY DIMENSIONS 1. Air Flow Direction: Toward label side. UNITS：mm SPEC.NO A12003230G-00 REVISION DATE 06. 03. 2013 建準電機工業股份有限公司 ISSUE DATE 04.30. 2005 E D I T I O N 1 SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD PAGE 5 OF 9 D.C.C. 2013.07.
SUNON Notes Ⅰ.SAFETY 1. DO NOT use or operate this fan in excess of the limitations set forth in this specification. SUNON is not responsible for the non-performance of this fan and/or any damages resulting from its use, if it is not used or operated in accordance with the specifications. 2. SUNON recommends adding a protection circuit to the product or application in which this fan is installed, such as a thermo-fuse, or current-fuse or thermoprotector.
SUNON Notes II. SPECIFICATION MODIFICATION 1. SUNON offers engineering assistance on fan installation and cooling system design. 2. All changes, modifications and/or revisions to the specifications, if any, are incorporated in the attached specifications. 3. No changes, modifications and/or revisions to these specifications are effective absent agreement, by both SUNON and the customer, in writing. 4.
SUNON Notes 5. This fan must be installed properly and securely. Improper mounting may cause harsh resonance, vibration, and noise. 6. Fan guards may prevent injury during handling or installation of the fan and are available for sale with this fan. 7. Unless otherwise noted, all testing of this fan is conducted at 25°C ambient temperature and sixty-five percent (65%) relative humidity. 8. DO NOT store this fan in an environment with high humidity.
SUNON Declaration of RoHS Control declaration of environment- related substances/ materials 1. In accordance with the Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU, SUNON product have complied with law and discipline not to employ the forbidden substances, and restrict the allowable concentration of some limited substances deliberately in our components.
