Datasheet

SUNON
Notes
5. This fan must be installed properly and securely. Improper mounting may
cause harsh resonance, vibration, and noise.
6. Fan guards may prevent injury during handling or installation of the fan and
are available for sale with this fan.
7. Unless otherwise noted, all testing of this fan is conducted at 25°C ambient
temperature and sixty-five percent (65%) relative humidity.
8. DO NOT store this fan in an environment with high humidity. This fan must be
stored in accordance with the attached specifications regarding storage
temperature. If this fan is stored for more than 6 months, SUNON
recommends functional testing before using.
9. SUNON reserves the right to use components from multiple sources at its
discretion. The use of components from other sources will not affect the
specifications as described herein.
10.The “Life Expectancy” of this fan has not been evaluated for use in
combination with any end application. Therefore, the Life Expectancy Test
Reports (L10 and MTTF Report) that relate to this fan are only for
reference.
VI. WARRANTY
This fan is warranted against all defects which are proved to be fault in our
workmanship and material for one year from the date of our delivery. The sole
responsibility under the warranty shall be limited to the repair of the fan or
the replacement thereof, at SUNON’s sole discretion. SUNON will not be
responsible for the failures of its fans due to improper handing, misuse or the
failure to follow specifications or instructions for use. In the event of warranty
claim, the customer shall immediately notify SUNON for verification. SUNON
will not be responsible for any consequential damage to the customer’s
equipment as a result of any fans proven to be defective.
SPEC.NO D01000921F-00
REVISION DATE
04. 15. 2013
ISSUE DATE 03. 27. 2009 E D I T I O N 6
建準電機工業股份有限公司
SUNONWEALTH ELECTRIC
MACHINE INDUSTRY CO., LT
D
P A G E 10 OF 11
2013.04.17