SUNON SPECIFICATION FOR APPROVAL CUSTOMER : MOTOR TYPE : DESCRIPTION : MagLev Motor Blower DIMENSIONS : 30X30X3 mm MODEL : UB5U3-500 SUNON SPEC. NO. : D03018191F-00 CUSTOMER APPROVAL NO. APPROVED BY CUSTOMER : : (AUTHORIZED) DRAWN Nancy 07/22 CHECKED Kiddy Cindy APPROVED Jacky SPEC.NO D03018191F-00 ISSUE DATE 02.27.2009 EDITION 8 REVISION DATE 07.22.2013 E.SPEC E30900059 建準電機工業股份有限公司 SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. NO. 30, LN. 296, XINYA RD., QIANZHEN DIST.
SUNON DC BRUSHLESS BLOWER MODEL : UB5U3-500 CHARACTERISTICS 1. Motor Design : Single phase, 6-poles Brushless DC motor. 2. Insulation Resistance : More than 20M ohm between internal stator and lead wire(+) measured at DC 100V. 3. Dielectric Strength : Applied AC 500V for one minute or AC 600V for 2 seconds between housing and lead wire(+) 4. Noise Level : Measured in a semi-anechoic chamber with background noise level below 15 dB(A).
SUNON SPECIFICATIONS MODEL : UB5U3-500 1-1. Rated Voltage : 5 VDC 1-2. Operating Voltage Range : 2~6 VDC 1-3. Starting Voltage : 2.0 VDC (25 deg. C POWER ON/OFF) 1-4. Rated Speed : 9500 RPM ± 20% 1-5. Air Delivery : 18.0 l/min 1-6. Static Pressure : 88.18 Pa 1-7. Rated Current : 72 mA 1-8. Rated Power : 0.36 WATTS 1-9. Noise Level : 25.6 dB(A) @ 1M 36.0 dB(A) @ 0.3M 1-10. Direction of Rotation : Counter-clockwise viewed from front of fan blade 1-11.
SUNON MODEL : UB5U3-500 PERFORMANCE CURVES STATIC PRESSURE mm-H2O 8 Pa 80 5VDC 4 40 0 0 0 10 20 0 0.01 0.02 l/min m3/min SPEC.NO D03018191F-00 REVISION DATE 07. 22. 2013 建準電機工業股份有限公司 ISSUE DATE 02. 27. 2009 E D I T I O N 8 D.C.C. SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. P A G E 4 OF 11 2013.08.
SUNON MATERIAL 2-1. Frame : Thermoplastic LCP of UL 94V-0 2-2. Impeller : Thermoplastic LCP of UL 94V-0 2-3. Lead Wire : UL10064,32 awg,+RED,-BLACK UL10064,32 awg,YELLOW:3rd Wire DIMENSIONS Note: SUNON recommends the screw and torque as below. Please contact SUNON, if any new requirement is requested. Screw Type (Pan head) Torque Machine screw 0.5～0.7 Kgf-cm Screw Spec Size Standard M1.7 JIS B1111-1974 1. One directional exhaust. 2.
SUNON T1 T2 T3 T4 T5 T6 T=1 Rotation T=T1+T2+T3+T4+T5+T6=(1 Rotation) T = 60 rpm SPEC.NO D03018191F-00 REVISION DATE 07. 22. 2013 建準電機工業股份有限公司 ISSUE DATE 02. 27. 2009 E D I T I O N 8 SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. P A G E 6 OF 11 D.C.C. 2013.08.
SUNON FAN 3rd WIRE SIGNAL ● F Type (Frequency Generator) SPEC.NO D03018191F-00 REVISION DATE 07. 22. 2013 建準電機工業股份有限公司 ISSUE DATE 02. 27. 2009 E D I T I O N 8 SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. P A G E D.C.C. 7 OF 11 2013.08.
SUNON Notes Ⅰ.SAFETY 1. DO NOT use or operate this fan in excess of the limitations set forth in this specification. SUNON is not responsible for the non-performance of this fan and/or any damages resulting from its use, if it is not used or operated in accordance with the specifications. 2. SUNON recommends adding a protection circuit to the product or application in which this fan is installed, such as a thermo-fuse, or current-fuse or thermoprotector.
SUNON Notes II. SPECIFICATION MODIFICATION 1. SUNON offers engineering assistance on fan installation and cooling system design. 2. All changes, modifications and/or revisions to the specifications, if any, are incorporated in the attached specifications. 3. No changes, modifications and/or revisions to these specifications are effective absent agreement, by both SUNON and the customer, in writing. 4.
SUNON Notes 5. This fan must be installed properly and securely. Improper mounting may cause harsh resonance, vibration, and noise. 6. Fan guards may prevent injury during handling or installation of the fan and are available for sale with this fan. 7. Unless otherwise noted, all testing of this fan is conducted at 25°C ambient temperature and sixty-five percent (65%) relative humidity. 8. DO NOT store this fan in an environment with high humidity.
SUNON Declaration of Restricted Materials Control declaration of environment- related substances/ materials 1. In accordance with the Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU and specific market requirements, SUNON Halogen-Free Product have complied with law and discipline not to employ the forbidden substances, and restrict the allowable concentration of some limited substances deliberately in our components.
