so 使用説明書 OWNER’S MANUAL GEBRAUCHSANWEISUNG I S T R U Z I O N I MANUAL D’INSTRUCTIONS MANUAL DE USUARIO 日本語 SUNPAK PZ40X 1 English Deutsch Français Italiano Español 07.3.
English IMPORTANT SAFEGUARDS Please read and follow these essential safety procedures to prevent accidents, splashes of liquid entering the unit may cause a fire, electric shock, or injury. injury to yourself and others, as well as property damage. Read all these Do not operate the unit in extremely humid environments, such as a bathroom or instructions carefully to insure the safe use of your Sunpak flash unit. near a humidifier. This may result in a fire, electric shock, or injury.
Welcome to the worldwide family of Sunpak Owners. Your Sunpak PZ40X is Features and Function of the Sunpak PZ40X specially designed for Sony α series. Your new PZ40X has many unique features; * Multi-step Auto Power Zoom function automatically provides optical flash coverage matched to the focal length of the lens in use. (24-80mm) * Super-compact size. This unit is 40% smaller and 2-1/2 oz.
English Description of Parts Bounce angle display to the upwards Flashtube Housing Accessory (optional) Mounting Guide Battery Compartment Cover LCD Display Mode Select Button Autofocus Infrared Flash Zoom Button Power Switch Ready Light/Test (Open Flash) button Knurled Lock Ring Dedicated/Hot Shoe Contact LCD Display Power Ratio When the focal length of a lens shifts to wider angle than 24mm, "F-mm" is displayed.
will not be available for several seconds. We suggest that you wait a few seconds Installing the batteries after the Ready Light activates to achieve maximum output. 1. Before installing the batteries, please check * If it takes longer than 30 seconds for the "Ready Light" to come back on, when that the power switch is in the "OFF" position. To the flash is fired in Full Power Mode, replace the batteries with a fresh set. unlock the battery compartment, push lightly on the center of the cover.
English Mode Select Button Note; this chart shows how to select the functions and set the PZ40X using the Mode Select Button and the Zoom button. Chart 1 Press the Zoom button Press the Mode Select Button ADI Mode TTL Mode This mode can be used only when using cameras having ADI mode. This mode can be used when using cameras without ADI mode.
Power Zoom Head The PZ40X is equipped with a motorized zoom ADI Mode 24 28 35 50 80 You can use ADI Mode when you use Sony α series having ADI Mode function (Please refer to Instruction Manual of camera.). When using the PZ40X, camera with ADI mode switches to "ADI" when an input button is pushed and "ADI" is displayed as shown in the figure at right. (The initial setup TTL Mode will be displayed if a switch is turned on.
English TTL Mode Manual Mode Mount the PZ40X on the camera and push the mode-selector button until the LCD panel displays TTL. The PZ40X now calculates exposure based on the camera's selected aperture and film speed and displays the effective TTL distance range. The display of the effective distance range does not appear until you partly depress the camera's shutter release or the Ready Light comes on. A bar graph shows the flash range display from 1.5 ft to 105 ft (0.5m to 32m).
Auto OK When the subject is within the Auto Effective Range and there is enough light, the "Auto OK" symbol in the LCD display will blink for about 2 seconds after the flash has been fired. If the symbol goes out, then there was not enough light for an exposure. In that case, either move closer to the object or select a larger aperture. Even if the subject is within the Auto Effective Range, the "Auto OK" symbol may not blink due to the color of an object (dark color with low reflectivity).
English Continuous Use Effective Lens focus Cover 28mm lens or more equivalent to 35mm film distance camera. Cover 18mm lens or more equivalent to APS size Do not use the flash continuously for more than the number of times stipulated in digital SLR camera. the table below, in order to prevent damage to the unit.
KAJ1384A SUNPAK PZ40X 56 07.3.
