Instruction Manual

Error Indications
17
ISSUE
POSSIBLE CAUSE
WHAT TO DO
Dishes are not
cleaned
Dishes were not properly loaded
Reload dishes properly.
Selected wash cycle was not
powerful enough
Select a more intensive wash cycle.
Not enough detergent
Use more or change brand of detergent.
Items are blocking the path of the
spray arm
Rearrange items so the spray arm can
fully rotate.
The lters are dirty/clogged or
installed incorrectly
Clean the lter and/or check installation.
Cloudiness on
glassware
Combination of too much detergent
with soft water
Use less detergent and/or select the
shortest wash cycle to clean glassware.
The lters may be dirty or clogged
Clean lters and/or check installation.
Black or gray marks
on dishes
Utensils may have rubbed against
dishes
Use a mild abrasive cleaner to eliminate
marks. Load more carefully.
Detergent left in
dispenser cup
Dishes blocked the detergent cup
Re-load dishes properly.
Dishes are not dry
Improper loading
Re-load dishes properly.
Not enough rinse-aid
Rell the rinse aid.
Dishes were removed too soon
Do not remove dishes from the
dishwasher immediately after wash.
Wrong cycle selected
Short cycles have lower cleaning
performance. Choose a more intensive
cycle.
Dishes/cutlery have low-quality
coating
Water drainage is more difcult with
these items. Dishes/cutlery of this type
are not suitable in this dishwasher.
INDICATION
MEANINGS
POSSIBLE CAUSES
E1
Restricted water inlet
Water supply is not turned on or
restricted; or water pressure too low
E4
Overow
Some element of dishwasher leaks.
WARNING!
If overow occurs, turn off the main water supply before calling for service.
If there is water in the base pan due to an overll or small leak, the water should be removed
before restarting the dishwasher.