User Manual

CLEANING
1. Please POWER OFF the unit and unplug from the wall socket.
2. Clean the surfaces of the unit, air inlet, and water tank with a soft cloth.
WARNINGS
1. Please power down the unit when the unit is not in use.
2. DO NOT store the power source in a wet/damp area.
3. Always keep the unit in its upright position to avoid leaks
4. Check to make sure the air inlet/outlet are clear from blockage.
FEATURES
SPECIFICATIONS
INSTRUCTION
1. General Instruction
ON/OFF Button Air Outlet
Indicator
Power Socket
Air Inlet
Water Tank
Hydraulic Cut-off
Water Tank Cover
Adaptor
AC Power Connector DC Power Connector
Model No.: Q1
Size: 146*146*227mm
Input: DC9V 2.5A
Power: 23W
Volume: 600ml
Working Capacity: 300ml/D (30℃, RH80%)
Applicable Ambient Temperature: 5-50℃
Coverage Area: ＜15㎡
If this product is found to be faulty as a result of faulty materials or workmanship
within one year from date of purchase, it will be repaired free of charge.
This guarantee is subject to the following terms:
Ÿ Sunpentown must be notified of the fault.
Ÿ Proof of purchase must be presented to Sunpentown’s nominated
representative.
Ÿ The warranty will be void if the product is modified, misused or repaired by an
unauthorized person.
Ÿ The warranty after repair will not be extended beyond the original one-year
period.
Ÿ All replacement parts will be new or reconditioned.
Ÿ Parts, which are replaced, become the property of Sunpentown.
Ÿ The warranty applies for the use of the product in the USA only.
What is NOT COVERED:
Ÿ Warranty does not include freight charges.
Ÿ Damage due to installation error, product abuse and/or misuse.
Ÿ Incidental or consequential damage caused by possible defects with this
product.
Ÿ Labor cost incurred for the installation and/or removal of a possible defective
unit.
Ÿ Damage to product caused by improper power supply voltage, accident, fire,
floods or acts of nature.
Ÿ Failure of product resulting from unauthorized modifications to the product.
Ÿ Improper installation or failure to perform the necessary maintenance.
Ÿ Normal wear and tear on parts or replacement of parts designed to be
replaced.
Ÿ Damage to personal property from use of product.
Ÿ Replacement or repair of household fuses, circuit breakers, wiring or plumbing.
This GUARANTEE is in addition to your Statutory Rights
SUNPENTOWN INTERNATIONAL INC.
14625 Clark Ave. City of Industry, CA 91745
Tel: [phone]
[e-mail]
FEATURES
SPECIFICATIONS
OPERATING INSTRUCTIONS
ON/OFF Button Air Outlet
Indicator
Power Socket
Air Inlet
Water Tank
Hydraulic Cut-off
Water Tank Cover
Adaptor
AC Power Connector DC Power Connector
Model No.: SD-300ML
Size: 146*146*227mm
Input: DC9V 2.5A
Power: 23W
Volume: 600ml
Working Capacity: 300ml/D (30℃, RH80%)
Applicable Ambient Temperature: 5-50℃
Coverage Area: ＜15㎡
This is a modern, light weight, and quiet dehumidifier that uses the Peltier effect to
keep your space cool and comfortable. It is ideal for rooms with poor ventilation
and dehumidifies at a rate of 300ml of water/day.
1. Hold ON/OFF button for 3 seconds to turn indicator on or off.
INDICATOR LIGHT
1. The water tank indicator light will turn RED when the 600ml capacity is reached.
The unit has a daily working capacity of 300ml.
2. When the indicator light turns RED, the unit will automatically shut off.
3. Please POWER OFF the unit before attempting to empty the water tank.
Be careful to not tilt the tank when it is full to avoid water spillage.
4. Slide the water tank cover off, empty the water, then slide the cover back on.
Reinsert the water tank into the unit to operate as instructed.
SD-300ML
INSTRUCTIONMANUAL
Please read these instruction thoroughly and
keep it in a safe place for future reference
MINI DEHUMIDIFIER
Your Guarantee
SD-300ML
On/Off
Indicator Light (Water tank level)
NOTE: The unit will automatically stop dehumidifying when frost is detected on the
surface of the cooling plate and the defrost function will be activated. Once defrost is
complete, the unit will resume dehumidifying automatically.
2. Press the ON/OFF button to turn on the unit.
3. Press the ON/OFF button to turn off the unit.
1. Connect the power source to the unit and plug into a wall socket.