INSTRUCTION MANUAL Standing Fan Model: SF-1467 Thank you very much for your purchasing the SUNPENTOWN Stand Fan. Please read the instructions carefully and keep for future reference.
IMPORTANT SAFETY INSTRUCIONS Please read all instructions before using this product. Save these instructions for easy reference. When using electrical appliances, basic precautions should always be followed to reduce breakage, risk of fire, electric shock and injury to persons including the following: • Do not use the fan outdoors. • Never use the fan unless it is fully assembled. • Do not use the fan under the following conditions: 1) High temperature of over 104F. 2) High humidity.
PARTS IDENTIFICATION Handle Fan Blade Oscillation Knob Motor Head Front Grille Axle Extension Tube Height Lock Base Stand Foot of Base Stand Base Plug Power cord Timer Knob Speed Buttons 2
ASSEMBLY INSTRUCTION A. Base Assembly 1. Place Base on flat and sturdy ground. 2. Turn the Foot of Base Stand over and remove the Lock Nut by turning counter-clock wise. 3. Insert Foot into base by aim the clip on the Foot to the groove on the base and press down firmly. Lock Nut Turn counterclock wise Bottom view of base stand WARNING During installation, take caution to not damage the insulation of power cord. 4. Replace Lock Nut and turn clock-wise until tightened.
B. Blade Assembly Axle 1. First, remove the following parts from the axle on the motor head. Please remove before installing grilles: Guard Lock Nut, Axle Sleeve and Lock Cap. Guard Lock Nut Axle Lock Cap Axle Sleeve Guard Lock Nut 2. Place the Rear Grille on the axle. 3. Place the Guard Lock Nut and tighten by turning clockwise. Rear Grille 4. Place the Axle Sleeve on the Axle. 5. Insert the Fan Blade on the Axle 6. Place the Lock Cap and tighten by turning clock-wise. 7. Install the Front Grille.
MAINTENANCE 1. 2. 3. 4. 5. 6. This product should be cleaned and checked on a regular basis. Make sure the fan blade is clean at all times, to prevent color fading and damage. For storage, clean and replace unit back in original packaging. Store in a cool, dry place. To clean housing, wipe with clean damp cloth. Never spray water directly onto the unit or immerse the unit/cord in water. Do not use harsh chemicals such as acid, alcohol and the such on any part of the fan.
