HEAVY DUTY 18” FANS Model: SF-1816 INSTRUCTION MANUAL PLEASE READ THIS INSTRUCTION BROOKLET THOROUGHLY BEFORE USE
SAFETY PRECAUTIONS Please read all instructions before using this product. Save these instructions for future reference. When using electrical appliances, basic precautions should always be followed to reduce breakage, risk of fire, electric shock and injury to persons including the following: • • • • • • • • • • • To avoid fire or shock hazard, this unit should ONLY be plugged into a polarized 120 volt AC outlet. Never use this fan unless it is fully assembled.
PARTS IDENTIFICATION FRONT GRILLE GRILLE SET (FROTN & REAR) REAR GRILLE OSCILLATION KNOB NUT FAN BLADE GRILLE LOCK SHAFT BASE LEG ATTACHMENT POINTS MOTOR HEAD HOUSING MOTOR HEAD HEAD HEAD REST LOCK NUT EXTENSION TUBE HEIGHT LOCK NUT THREE-LEGGED BASE POWER CORD RUBBER FEET COVERS INSTALLATION WARNING: Do not plug in appliance until unit is fully assembled. Head Assembly 1. Remove Fan Blade Cap from the Motor Shaft by turning clockwise. 2.
OPERATION 0 = OFF 1 = LOW 2 = MEDIUM 3 = HIGH Control knob can turn in either direction. Press down on the Oscillation Knob to oscillate fan. Pull up on the Oscillation Knob for fixed fan direction. To adjust height, loosen the Height Lock Nut and adjust to desired height; tighten Height Lock Nut. Height is adjustable from 2.5 to 3 ft.
